(Success) Mountain Lion 10.8.5 GA-B85M-D3H LGA 1150 mATX i74770k

[protirockstar]

(Sucess) Mountain Lion 10.8.5 GA-B85M-D3H LGA 1150 mATX i74770k

my config- b85m d3h, i5 4570, nvidia gtx 650, corsair vengeance 8gb, corsair 550w psu

i followed the exact same procedure as above
ML installed smoothly without any boot flags….. however after the installation it was only booting with -x…i tried -v (attaching the pic) and it was getting stuck at 'pci configuration begin'………so i installed multi beast in safe mode…. even after that it was not booting without -x....where am i going wrong...plzzzz help!!

 

[protirockstar]

Guys i am soo totallybstuck on this....plzz help me out...thanks a lot in advance!!!

 

[saganian1]

This is my build to use as a Logic X and Pro Tools DAW. I will post hardware specs with links if someone will verify that I am allowed to link Microcenter as this was the place that I bought the parts.

Created USB Image using Unibeast 2.1.0 and Retail Apple Mountain Lion 10.8.5 release.

Hardware Used:

GigabyteGA-B85M-D3H LGA 1150 mATX Intel Motherboard
IntelCore i7 4770K 3.5GHz Socket LGA 1150
CrucialBallistix Sport 16GB DDR3-1600 (PC3-12800) CL9 Dual Channel Desktop Memory Kit (Two 8GB Memory Modules)
SanDisk Extreme SDSSDX-120G-G25 120GB SATA 6.0Gb/s 2.5" Internal Solid State Drive
Toshiba3TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive PH3300U-1I72
ThermaltakeTR2 Series 600 Watt ATX Power Supply
TP-LINK TL-WN851ND Wireless N PCI AdapterTP-Link(http://www.osx86.net/files/file/65-tl-wn851nd-ar9227/)

........................

Hi taymeslayer,

I am using the same motherboard and same wireless adapter, my motherboard doesn't seem to recognize the adapter. how did you make it work? i clicked on the link you posted next to the adapter name but the page must have been removed and shows nothing.

can you please help me.

my build:
GigabyteGA-B85M-D3H LGA 1150 mATX Intel Motherboard
Intel i3-4340 3.6 Ghz LGA 1150
OS X 10.9.4
TP-LINK TL-WN851ND Wireless N PCI AdapterTP-Link

Everything on my Hackintosh works, my LAN works, just not the wireless card, please let me know when you can, thanks.

 

[saganian1]

Got the issue fixed.

cpus=1 fixed it.

 

[caseabrook]

Hey mate,

Great guide!

I know it is probably common knowledge, but i cannot stress enough DO THE LATEST BIOS UPDATE FOR THIS BOARD. You might want to add that in

I went through the guide step by step, and had numerous issues (had a very early release board F4). Once i did the latest bios update F14 worked like a charm. No -x required.

update below:

http://www.gigabyte.com.au/products/product-page.aspx?pid=4567#bios

 

[saganian1]

Hi cesarbrook,

Are you talking about the wifi card issue or something else?

 

[KloAkEnJoE]

Hi all,

some one tryed Yosmite on this Board ?

My Setup:
Gigabyte B85M-D3H
Intel i5-4570 - HD4600
nVidia GTX970 Palit 4GB

Can start installer with "-x -v" without the GTX and can install the System, Unibeast method.
After that, i can boot the os sometimes with "-x -v GraphicsEnabler=No". After booting don't comes the login screen, only a colerfull pixelized screen. When i put the HDMI cable out and in somtimes i comes on the start screen, most times not.

Same Problems under 10.9.5 Unibeast method.

With the GTX no way.

Help would be great

EDIT::::::

Done everything works with GTX970...

http://www.tonymacx86.com/yosemite-...emite-b85-d3h-i5-4570-gtx970-small-guide.html