Contribute
Register

[Success] Mojave on Lenovo Ideapad 320 15iKB (Model 80YH)

Status
Not open for further replies.
Thank you for so fast reply, I really appreciate.

Actually, my attached EFI is an old version of your EFI (I think is the first post). The HDMI works, but he can't show resolutions bigger than 1080p in System Preferences.

I try to use this one from your guide, but when it starts, Clover don't find any MacOS partition, even from the USB stick.

Sorry for late response, I couldn't test it before.

Thanks
Hi
I'm gonna updated the guide in a couple of days.
You cant show a bigger resolution in your monitor or your laptop's screen?
 
My laptop screen resolution it's fine, it shows correctly 1080p. The HDMI monitor has a 21:9 resolution (2560x1080) but in SysPrefs the maximum resolution for them is 1080p
 
My laptop screen resolution it's fine, it shows correctly 1080p. The HDMI monitor has a 21:9 resolution (2560x1080) but in SysPrefs the maximum resolution for them is 1080p
You've probably didn't choose the right SMBIOS for your configuration
Try to remove boot argument -cdfon in your config.plist
And add this patch to your config.plist.
 

Attachments

  • Screen Shot 2020-04-04 at 4.32.47 AM.png
    Screen Shot 2020-04-04 at 4.32.47 AM.png
    209.1 KB · Views: 99
You're my savior , this efi made my trackpad work , i was so frustated trying to fixing it myself , thank you
 
hey guys!
mine is a Lenovo-Ideapad-320- 14IKB and it's running Mojave 10.14.6 (18G95).
everything is fine. didn't try HDMI yet, but air plays works good.

what I didn't get is touchpad. it points ok but click is very bad. I'm using usb mouse.
how can I make it work gestures?
Has wifi been working with you ?
 
Brightness (The shortcuts are Fn+C and Fn+P, I don't know why, randomly discovered).

I have this same issue on mine.

I've made the install using OpenCore and everything has running quite well, all the features are just fine. Only this one that getting my sleep off.

Is that possible to change it without patching anything?
 
Good evening everyone. I need help. I installed the macos catalina 10.15.6.

Working:
-Audio
-Bluetooth
-Drums

Not working:
-HDMI
-Some keys on the keyboard are not working properly.
-trackpad
-Wifi (but I'm already aware that it never worked)

my notebook is Lenovo ideapad 320 - 15ikb (80YH)

I'm using this EFI.

My SMBIOS is not showing anything, the entire CLOVER CONFIGURATOR is empty.
 

Attachments

  • EFI.zip
    7.2 MB · Views: 69
Good evening everyone. I need help. I installed the macos catalina 10.15.6.

Working:
-Audio
-Bluetooth
-Drums

Not working:
-HDMI
-Some keys on the keyboard are not working properly.
-trackpad
-Wifi (but I'm already aware that it never worked)

my notebook is Lenovo ideapad 320 - 15ikb (80YH)

I'm using this EFI.

My SMBIOS is not showing anything, the entire CLOVER CONFIGURATOR is empty.
As per rules, please update your hardware profile to allow others to help you easier

please read the faq for proper hardware profile setup:
 
I have an Ideapad 320 15ikb i5 8250, 8ram 120ssd, radion 530 GPU 2gp does the system support macOS
 
Hey guys, after some day and nights of deep searching, I've managed to install Mojave on my Ideapad 320, and I just want to share with you. And, if possible, get help with things that are still not working.

What's working:
Trackpad (It's a bit weird in mojave, can't 2 taps and drag, but 3 fingers drags and pointing works well)
HD620 (1536MB and HDMI working)
HDMI Audio
Ethernet
Brightness (The shortcuts are Fn+C and Fn+P, I don't know why, randomly discovered).

Not working:
Audio (I can get headphones working using VoodooHDA, but then HDMI sometimes works, sometimes don't)
Wi-Fi (Seems to be impossible to make this work, maybe replacing card)

So. I don't know much about DSDT Patching, actually I just took that DSDT from somewhere some time ago, worked on High Sierra and i just forgot from where I took it. And now, MaciASL doesn't open on Mojave and I can't do anything.

If some of you guys could take a look on it and see if I could get Audio and mic working (It's important to my job) I'd really appreciate.



EDIT 1:
I'm adding here my new EFI folder with better trackpad, audio fully working and some updated kexts.
To INSTALL you need to insert a invalid ig-platform-id, then, after installing and booting, you put it back.

Wi-Fi stills not working, and probably will never work.
Internal mic doesn't works on calls and chrome, but works in screen recorder, don't know why.

Using 10.14.3 with no problems so far.

EDIT 2:
I've faced some problems on 14.4 update, had to change the way the graphics where injected,
Hey guys, after some day and nights of deep searching, I've managed to install Mojave on my Ideapad 320, and I just want to share with you. And, if possible, get help with things that are still not working.

What's working:
Trackpad (It's a bit weird in mojave, can't 2 taps and drag, but 3 fingers drags and pointing works well)
HD620 (1536MB and HDMI working)
HDMI Audio
Ethernet
Brightness (The shortcuts are Fn+C and Fn+P, I don't know why, randomly discovered).

Not working:
Audio (I can get headphones working using VoodooHDA, but then HDMI sometimes works, sometimes don't)
Wi-Fi (Seems to be impossible to make this work, maybe replacing card)

So. I don't know much about DSDT Patching, actually I just took that DSDT from somewhere some time ago, worked on High Sierra and i just forgot from where I took it. And now, MaciASL doesn't open on Mojave and I can't do anything.

If some of you guys could take a look on it and see if I could get Audio and mic working (It's important to my job) I'd really appreciate.



EDIT 1:
I'm adding here my new EFI folder with better trackpad, audio fully working and some updated kexts.
To INSTALL you need to insert a invalid ig-platform-id, then, after installing and booting, you put it back.

Wi-Fi stills not working, and probably will never work.
Internal mic doesn't works on calls and chrome, but works in screen recorder, don't know why.

Using 10.14.3 with no problems so far.

EDIT 2:
I've faced some problems on 14.4 update, had to change the way the graphics where injected, and fixing the purple HDMI and HDMI audio. Anyway, new EFI folder attached.
I updated the title because looks like some people are using my EFI folders on others versions of ideapad 320 and it's not working, I'm pretty sure you just have to do some changes, so good luck.
Hi , please tell me how to do is there a tutorial ? I have a lenovo 320 17IKB
and fixing the purple HDMI and HDMI audio. Anyway, new EFI folder attached.
I updated the title because looks like some people are using my EFI folders on others versions of ideapad 320 and it's not working, I'm pretty sure you just have to do some changes, so good luck.
 
Status
Not open for further replies.
Back
Top