[SUCCESS] Intel Core i9 7920X, Gigabyte X299 Aorus Ultra Gaming, GTX 1080 Samsung 960 EVO NVMe

[Ellybz]

Hahah.. I just updated to F9G... Tried to load your config.. Turns out your config was made using F9f.
I even checked the file with a hex editor to make sure.


Ah.. That makes sense.

There you go. BIOS preset saved for F9G and Bios f9f ( previous preset ). Your choice

 

[figgy78]

There you go. BIOS preset saved for F9G and Bios f9f ( previous preset ). Your choice

Brilliant! Thanks!

 

[nmano]

My system went to sleep not wake up.


If I enter keyboard for wake up black screen.
Please help.

System detail

Gigabyte X299 WU8
Intel Core i9-9980XE Extreme Edition Processor
CORSAIR Vengeance RGB 64GB (4x16GB) DDR4 3200MHz C16 Desktop Memory
Corsair H115i RGB
Samsung SM 970 500GB
Sapphire Radeon RX Vega 64

drivers64UEFI

ApfsDriverLoader-64.efi
AptioMemoryFix-64.efi
DataHubDxe-64.efi
EmuVariableUefi-64.efi
FSInject-64.efi
HFSPlus-64.efi
NTFS-64.efi
PartitionDxe-64.efi
SMCHelper-64.efi

Last login: Tue Feb 12 19:25:10 on console
Navaratnams-Mac-Pro-2:~ x58$ pmset -g assertions
2019-02-12 19:46:19 -0500
Assertion status system-wide:
   BackgroundTask                 0
   ApplePushServiceTask           0
   UserIsActive                   1
   PreventUserIdleDisplaySleep    0
   PreventSystemSleep             0
   ExternalMedia                  1
   PreventUserIdleSystemSleep     0
   NetworkClientActive            0
Listed by owning process:
   pid 56(powerd): [0x0000002f00088002] 00:21:45 ExternalMedia named: "com.apple.powermanagement.externalmediamounted"
   pid 97(hidd): [0x0000004f0009809f] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968911.3"
    Timeout will fire in 9900 secs Action=TimeoutActionRelease
   pid 41(UserEventAgent): [0x000001a3000b81f2] 00:15:33 BackgroundTask named: "com.apple.warmd.bootcache.optimization"
    Created for PID: 66.
Kernel Assertions: 0x104=USB,MAGICWAKE
   id=502  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.14310000 owner=USB2.0 Hub             
   id=504  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.14330000 owner=USB Optical Mouse
   id=505  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.14340000 owner=USB2.0 Hub             
   id=507  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.15310000 owner=USB3.0 Hub             
   id=509  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.14312000 owner=DataTraveler 2.0
   id=510  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.15340000 owner=USB3.0 Hub             
   id=512  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.14344000 owner=USB Receiver
   id=513  level=255 0x100=MAGICWAKE mod=1969-12-31, 7:00 PM description=en0 owner=en0
Idle sleep preventers: IODisplayWrangler
Navaratnams-Mac-Pro-2:~ x58$

 

[Ellybz]

My system went to sleep not wake up.


If I enter keyboard for wake up black screen.
Please help.

System detail

Gigabyte X299 WU8
Intel Core i9-9980XE Extreme Edition Processor
CORSAIR Vengeance RGB 64GB (4x16GB) DDR4 3200MHz C16 Desktop Memory
Corsair H115i RGB
Samsung SM 970 500GB
Sapphire Radeon RX Vega 64

drivers64UEFI

ApfsDriverLoader-64.efi
AptioMemoryFix-64.efi
DataHubDxe-64.efi
EmuVariableUefi-64.efi
FSInject-64.efi
HFSPlus-64.efi
NTFS-64.efi
PartitionDxe-64.efi
SMCHelper-64.efi

Last login: Tue Feb 12 19:25:10 on console
Navaratnams-Mac-Pro-2:~ x58$ pmset -g assertions
2019-02-12 19:46:19 -0500
Assertion status system-wide:
   BackgroundTask                 0
   ApplePushServiceTask           0
   UserIsActive                   1
   PreventUserIdleDisplaySleep    0
   PreventSystemSleep             0
   ExternalMedia                  1
   PreventUserIdleSystemSleep     0
   NetworkClientActive            0
Listed by owning process:
   pid 56(powerd): [0x0000002f00088002] 00:21:45 ExternalMedia named: "com.apple.powermanagement.externalmediamounted"
   pid 97(hidd): [0x0000004f0009809f] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968911.3"
    Timeout will fire in 9900 secs Action=TimeoutActionRelease
   pid 41(UserEventAgent): [0x000001a3000b81f2] 00:15:33 BackgroundTask named: "com.apple.warmd.bootcache.optimization"
    Created for PID: 66.
Kernel Assertions: 0x104=USB,MAGICWAKE
   id=502  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.14310000 owner=USB2.0 Hub       
   id=504  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.14330000 owner=USB Optical Mouse
   id=505  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.14340000 owner=USB2.0 Hub       
   id=507  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.15310000 owner=USB3.0 Hub       
   id=509  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.14312000 owner=DataTraveler 2.0
   id=510  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.15340000 owner=USB3.0 Hub       
   id=512  level=255 0x4=USB mod=1969-12-31, 7:00 PM description=com.apple.usb.externaldevice.14344000 owner=USB Receiver
   id=513  level=255 0x100=MAGICWAKE mod=1969-12-31, 7:00 PM description=en0 owner=en0
Idle sleep preventers: IODisplayWrangler
Navaratnams-Mac-Pro-2:~ x58$

If you need proper help on your issues, you should mention what version of OSX you are running, post your entire EFI folder so others can see it - without serial number or UUID from config.plist/SMBIOS , your IOreg saved ( you'll need IORegistry explorer application ) and the screenshot details of: About this mac-> system report -> PCI. ( I put mine below as an example ). Also, because this thread is not very active, you should also post all the requested infos on the following thread . Good luck for now .

iMac Pro X299 - Live the Future now with macOS 10.14 Mojave [Successful Build/Extended Guide]

Up and successfully running macOS Mojave 10.14.4 (18E226) on iMacPro Skylake-X/X299 This afternoon @DSM2 advised me that yesterday Apple seems to have added a second special build of MacOS 10.14.4 (18E2034) on swcdn.apple.com, likely for new devices. Abstract and Introduction: This...

www.tonymacx86.com

 

[nmano]

If you need proper help on your issues, you should mention what version of OSX you are running, post your entire EFI folder so others can see it - without serial number or UUID from config.plist/SMBIOS , your IOreg saved ( you'll need IORegistry explorer application ) and the screenshot details of: About this mac-> system report -> PCI. ( I put mine below as an example ). Also, because this thread is not very active, you should also post all the requested infos on the following thread . Good luck for now .

iMac Pro X299 - Live the Future now with macOS 10.14 Mojave [Successful Build/Extended Guide]

Up and successfully running macOS Mojave 10.14.4 (18E226) on iMacPro Skylake-X/X299 This afternoon @DSM2 advised me that yesterday Apple seems to have added a second special build of MacOS 10.14.4 (18E2034) on swcdn.apple.com, likely for new devices. Abstract and Introduction: This...

www.tonymacx86.com

Thanks @Ellybz
Please check
#1,778

 

[Ellybz]

Brilliant! Thanks!

Have you fixed your sleep issue? If not, post your EFI and I'll look into it.

 

[Killean]

@robifis ,

Could you tell me if you were able to get the Power Management +Sleep for your system working correctly? I have some serious issues with this for 3 weeks and tried so many things.
Currently, I am trying an approach by creating this USB Kext explained by @kgp. But, if that would not work, I would be out of ideas.

 

[Ellybz]

@robifis ,

Could you tell me if you were able to get the Power Management +Sleep for your system working correctly? I have some serious issues with this for 3 weeks and tried so many things.
Currently, I am trying an approach by creating this USB Kext explained by @kgp. But, if that would not work, I would be out of ideas.

@Tepoo
I have posted The solution for your sleep wake issue on another thread.

iMac Pro X299 - Live the Future now with macOS 10.14 Mojave [Successful Build/Extended Guide]

Sleep/wake usually works with my EFI-Folders + guidelines independent of CPU, GPU or motherboard brand. Also on my own system sleep/wake works absolutely flawless. With this answer I will stop my activities in the Hackintosh Community for now. No further guide development or support from my...

www.tonymacx86.com

You do not need to enable Kernel pm. Only add in clover/Kernel and kext patches/ kexttopatch the following patch: ( valid for 10.14.1 and above )
FIND: 31D2E891 FCFFFF
REPLACE: 31D29090 909090

 

[Killean]

hey @Ellybz ,

if you are talking about this here

Find: 31D2E891 FCFFFF
Replace: 31D29090 909090

mentioned it to me and it sadly does not work. I can not 100% recap what happens, but @franksanderdo is helping me currently getting the EFI setup straight, I assume the fix for my issues with wake-sleep will come hand in hand with this.

if you are talking about something else, please let me know

 

[Ellybz]

hey @Ellybz ,

if you are talking about this here

Find: 31D2E891 FCFFFF
Replace: 31D29090 909090

mentioned it to me and it sadly does not work. I can not 100% recap what happens, but @franksanderdo is helping me currently getting the EFI setup straight, I assume the fix for my issues with wake-sleep will come hand in hand with this.

if you are talking about something else, please let me know

This is the only difference to be added from the KGP EFI recommendation. You do not have the use a custom USB Kext as port limit patch works very well. Also you should read few post on this thread about solving other issues with Sleep wake. ( pmset -g assertions) SSDTs are not necessary if you do not want to create them. RX580 I fully recognised. Good luck.