[Success] GIGABYTE Z370 Gaming 7 + Intel Core i7-8700K + RX 580 + (2x) Dell P2715Q 4k @ 60Hz

[Thirrouard]

Hi Thirrouard, I've just been going back on my posts and have noticed in your profile that it says you are running a Mac Pro 4,1.

My reply to you was based upon running this golden build on a 'Hack'. If that's what you are trying to do, would you update your build and profile with your hardware configuration, please?

If you are on a real Mac, then you are in the wrong place!

If you have resolved your issue, could you give feedback on what it was so it may help others in this thread/forum.

Jim

I used to have a Mac Pro but needed more power so now running a Hackintosh

 

[EdwardVH]

I there's a driver add-on page for APFS in Clover Configurator. IDK which target drive you're supposed to pick other than the system drive.

View attachment 363264

I haven't yet tested it to see if it will mount my Windows volume properly.

Doesn't appear to work. You can mount the volume, say USB drive, but cannot write to it.

 

[Thirrouard]

This is what I get when I plug my second RX 580...

 

[P1LGRIM]

This is what I get when I plug my second RX 580...

For Error loading kernel cache (0x9) boot with -f UseKernelCache=No or use Rehabman's version of Clover and boot without caches from the menu.

 

[Thirrouard]

So, I managed to have actually iGFX + two RX cards working on my z170, but on the z370 whenever I have two graphic cards, either the iGFX + RX or two RX, it tell me the same error
And I put “usekernelcache=no” :-/

 

[Thirrouard]

This is my EFI/Clover if that helps

 

[P1LGRIM]

And I put “usekernelcache=no”

Arguments are case sensitive, usekernelcache=no is wrong and will have no effect.

 

[Thirrouard]

Oh ok ! Well but I believe -f is “UseKernelCache=No”
I actually wrote it with capital except for “no”

 

[Thirrouard]

Now even more strange, it starts with the two cards but only one is detected by the system ... and when I want to enable iGPU I get that
That’s with -f UseKernelCache=No

 

[scottkendall]

So, I managed to have actually iGFX + two RX cards working on my z170, but on the z370 whenever I have two graphic cards, either the iGFX + RX or two RX, it tell me the same error
And I put “usekernelcache=no” :-/

Long story short, I currently have 1 Vega 64, 1 RX 560, and IGPU "enabled" you could try my EFI if you like it is attached. However, I will not be much help otherwise as I just plugged them in and they worked.