- Joined
- Jul 27, 2011
- Messages
- 25
- Motherboard
- Gigabyte GA-Z68X-UD3H-B3
- CPU
- i7-2600K
- Graphics
- GTX 560 Ti
This is for
GA-Z97X-UD3H v.1.0 (tested with BIOS F7)
+ Intel Core i7 4970K
+ GeForce GTX 770 (Asus 2048 MB)
GeekBench scores : Single Core = 3994 Multi Core = 15698 http://browser.primatelabs.com/geekbench3/778242
—————————————
Prerequirements :
A) Create OS installer :
B) upgrade Gigabyte BIOS to F7 if needed (watch out, it will reset BIOS setup to default)
http://www.gigabyte.com/products/product-page.aspx?pid=4960#bios
C) set bios1 (memory profile 1 / VT-d disable / SATA mode AHCI, etc… see picture)
https://plus.google.com/photos/1123...ms/6057871780097339441?authkey=CM65qbaW956uag
OS X Installation :
5) boot from USB installer and install Maverick on HDD (on a GPT>hfs+ partition)
6) boot from USB installer bootloader and choose to boot your new OS X from your drive
7) use MultiBeast (v6.4.2) with this configuration :
————————————————————————————————————
***MAKE SURE TO UNSELECT THIS ONE*** (as DSDT Free automatically selects it)
So to resume:
8) reboot and choose your drive as default boot drive through BIOS.
9) Only if you get boot0 error when trying to boot from your drive bootloader :
use solution 1 from here : http://www.tonymacx86.com/25-boot0-error-official-guide.html
quick reminder for advanced users : dd if=/usr/standalone/i386/boot1h of=/dev/diskXsY
10 NOTE) From here you should have a working system apart for the Gigabyte sound input/output.
Note that sometimes, when I boot my new OS X with a USB stick plugged in, I get IOUSBFamily kernel panic. Just try to reboot again, and/or remove your USB sticks from the computer during boot.
11) to activate the sound : follow the great guide created by Toleda : http://www.tonymacx86.com/audio/112461-mavericks-no-audio-realtek-alc-applehda-guide.html
To go quickly on my experience with it :
…Thanks to Toleda, TonymacX86, and all the active forum members / tools developers !
One more thing not working (but just because I haven't yet checked about it) is iMessage logging.
GA-Z97X-UD3H v.1.0 (tested with BIOS F7)
+ Intel Core i7 4970K
+ GeForce GTX 770 (Asus 2048 MB)
GeekBench scores : Single Core = 3994 Multi Core = 15698 http://browser.primatelabs.com/geekbench3/778242
—————————————
Prerequirements :
A) Create OS installer :
1) Download Maverick (v10.9.4) on Mac App Store : https://itunes.apple.com/us/app/os-x-mavericks/id675248567
2) format USB key to MBR>hfs+
3) Use UniBeast (v4.0.2) to create bootable USB installer http://www.tonymacx86.com/downloads
2) format USB key to MBR>hfs+
3) Use UniBeast (v4.0.2) to create bootable USB installer http://www.tonymacx86.com/downloads
B) upgrade Gigabyte BIOS to F7 if needed (watch out, it will reset BIOS setup to default)
http://www.gigabyte.com/products/product-page.aspx?pid=4960#bios
C) set bios1 (memory profile 1 / VT-d disable / SATA mode AHCI, etc… see picture)
https://plus.google.com/photos/1123...ms/6057871780097339441?authkey=CM65qbaW956uag
OS X Installation :
5) boot from USB installer and install Maverick on HDD (on a GPT>hfs+ partition)
6) boot from USB installer bootloader and choose to boot your new OS X from your drive
7) use MultiBeast (v6.4.2) with this configuration :
————————————————————————————————————
Quick Start > DSDT Free pre-configured choices:
Drivers -> Disk -> 3rd Party SATA
Drivers -> Misc -> FakeSMC v6.9.1315
Drivers -> System -> AppleRTC Patch for CMOS Reset
Bootloaders -> Chimera v3.0.1
Customize -> Boot Options -> Basic Boot Options
Customize -> Boot Options -> Use KernelCache
Customize -> System Definition -> Mac Pro -> Mac Pro 3,1
Customize -> Themes -> tonymacx86 Black
Customize -> Boot Options -> Hibernate Mode - Desktop
Drivers -> Misc -> FakeSMC v6.9.1315
Drivers -> System -> AppleRTC Patch for CMOS Reset
Bootloaders -> Chimera v3.0.1
Customize -> Boot Options -> Basic Boot Options
Customize -> Boot Options -> Use KernelCache
Customize -> System Definition -> Mac Pro -> Mac Pro 3,1
Customize -> Themes -> tonymacx86 Black
Customize -> Boot Options -> Hibernate Mode - Desktop
***MAKE SURE TO UNSELECT THIS ONE*** (as DSDT Free automatically selects it)
[Customize -> Boot Options -> Generate CPU States
So to resume:
Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Audio > Realtek ALCxxx > Intel 9 Series Motherboard Support
Drivers > Disk > 3rd Party SATA
Drivers > Misc > FakeSMC v6.9.1315
Drivers > Misc > FakeSMC v6.9.1315 Plugins
Drivers > Misc > FakeSMC v6.9.1315 HWMonitor Application
Drivers > Misc > USB 3.0 - Universal
Drivers > Network > Intel > AppleIntelE1000e v3.1.0
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v3.0.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > IGPEnabler=No
Customize > Boot Options > PCI Root ID Fix
Customize > Boot Options > Use KernelCache
Customize > Boot Options > Verbose Boot
Customize > Boot Options > 1080p Display Mode
Customize > System Definitions > Mac Pro > Mac Pro 3,1
Customize > Themes > tonymacx86 Black
————————————————————————————————————Drivers > Audio > Realtek ALCxxx > Intel 9 Series Motherboard Support
Drivers > Disk > 3rd Party SATA
Drivers > Misc > FakeSMC v6.9.1315
Drivers > Misc > FakeSMC v6.9.1315 Plugins
Drivers > Misc > FakeSMC v6.9.1315 HWMonitor Application
Drivers > Misc > USB 3.0 - Universal
Drivers > Network > Intel > AppleIntelE1000e v3.1.0
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v3.0.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > IGPEnabler=No
Customize > Boot Options > PCI Root ID Fix
Customize > Boot Options > Use KernelCache
Customize > Boot Options > Verbose Boot
Customize > Boot Options > 1080p Display Mode
Customize > System Definitions > Mac Pro > Mac Pro 3,1
Customize > Themes > tonymacx86 Black
8) reboot and choose your drive as default boot drive through BIOS.
9) Only if you get boot0 error when trying to boot from your drive bootloader :
use solution 1 from here : http://www.tonymacx86.com/25-boot0-error-official-guide.html
quick reminder for advanced users : dd if=/usr/standalone/i386/boot1h of=/dev/diskXsY
10 NOTE) From here you should have a working system apart for the Gigabyte sound input/output.
Note that sometimes, when I boot my new OS X with a USB stick plugged in, I get IOUSBFamily kernel panic. Just try to reboot again, and/or remove your USB sticks from the computer during boot.
11) to activate the sound : follow the great guide created by Toleda : http://www.tonymacx86.com/audio/112461-mavericks-no-audio-realtek-alc-applehda-guide.html
To go quickly on my experience with it :
11a) Sometimes I am blocked in the section**"III. No Codec" and I have no idea why (Can the sound chip bug ? Toleda’s instruction III .1.1.1-6 would suppose it) . Just reboot and hope you see the codec name "Realtek ALC1150" in DPCI Manager.
http://sourceforge.net/projects/dpcimanager/
11b) Now if you can you see the codec name "Realtek ALC1150" in DPCI Manager, then in IORegistryExplorer my default layout-id is <00 00 00 00> (in IORegistryExplorer do a search with HDEF to find your layout-id) so I have no audio devices. I then installed HDAEnabler1.kext https://github.com/toleda/audio_kext_enabler/blob/master/HDAEnabler1.kext.zip using KextBeast. Then restarted, then verified that my layout-id was now <01 00 00 00> and that I had sound input and output working for the ALC1150.
https://github.com/toleda/audio_ALCInjection/blob/master/IORegistryExplorer_v2.1.zip
(I don’t know about HDMI Audio as I don’t care about it).
http://sourceforge.net/projects/dpcimanager/
11b) Now if you can you see the codec name "Realtek ALC1150" in DPCI Manager, then in IORegistryExplorer my default layout-id is <00 00 00 00> (in IORegistryExplorer do a search with HDEF to find your layout-id) so I have no audio devices. I then installed HDAEnabler1.kext https://github.com/toleda/audio_kext_enabler/blob/master/HDAEnabler1.kext.zip using KextBeast. Then restarted, then verified that my layout-id was now <01 00 00 00> and that I had sound input and output working for the ALC1150.
https://github.com/toleda/audio_ALCInjection/blob/master/IORegistryExplorer_v2.1.zip
(I don’t know about HDMI Audio as I don’t care about it).
…Thanks to Toleda, TonymacX86, and all the active forum members / tools developers !
One more thing not working (but just because I haven't yet checked about it) is iMessage logging.