- Joined
- Dec 14, 2016
- Messages
- 42
- Motherboard
- ASUS-B360M-Gaming S
- CPU
- I7-8700ES
- Graphics
- RX560
- Mobile Phone
Components
Intel G3430/G3260 Processor (I don't know which one)> Amazon
ASUS H81M-K Motherboard > Amazon
Kingston Value RAM 4GB Memory > Amazon
Seagate BarraCuda ST1000DM010 Hard Drive > Amazon
GeForce 210 1024 MB Graphics Card > Amazon
Comments
Installation
1、Make the USB installer following the tonymacx86's Installation Guide,Open config.plist ,Set as follows:
2、Set BIOS
3、Boot from USB stick with F8 on ASUS boot screen;
4、Choose macOS format disk per guide,HSJ,and install macOS to the disk
5、Reboot,boot from USB,and run MultiBeast with below choices:
6、use the ssdtPRGen.sh
The results are at ~/Library/ssdtPRGen/SSDT.aml.
Summary
What Works
everything
What Does Not Work
none
Intel G3430/G3260 Processor (I don't know which one)> Amazon
ASUS H81M-K Motherboard > Amazon
Kingston Value RAM 4GB Memory > Amazon
Seagate BarraCuda ST1000DM010 Hard Drive > Amazon
GeForce 210 1024 MB Graphics Card > Amazon
Comments
Installation
1、Make the USB installer following the tonymacx86's Installation Guide,Open config.plist ,Set as follows:
Code:
<key>Graphics</key>
<dict>
<key>Inject</key>
<key>NVidia</key>
<true/>
2、Set BIOS
os→other os
fastboot→disable
fastboot→disable
3、Boot from USB stick with F8 on ASUS boot screen;
4、Choose macOS format disk per guide,HSJ,and install macOS to the disk
5、Reboot,boot from USB,and run MultiBeast with below choices:
Quick Start > UEFI Boot Mode
Drivers > Audio > Realtek ALCxxx > ALC887/888b
Drivers > Graphics > Inject NVIDIA
Drivers > Misc > FakeSMC v6.25-333-g05e0f4be.1759 <---Quick Start default
Drivers > Misc > FakeSMC Plugins v6.25-333-g05e0f4be.1759
Drivers > Misc > FakeSMC HWMonitor Application v6.25-333-g05e0f4be.1759
Drivers > Network > Realtek > RealtekRTL8111 v2.2.1
Bootloaders > Clover v2.4k r4173 UEFI Boot Mode <---Quick Start default
Customize > System Definitions > iMac > iMac 14,2 <---Quick Start default
Drivers > Audio > Realtek ALCxxx > ALC887/888b
Drivers > Graphics > Inject NVIDIA
Drivers > Misc > FakeSMC v6.25-333-g05e0f4be.1759 <---Quick Start default
Drivers > Misc > FakeSMC Plugins v6.25-333-g05e0f4be.1759
Drivers > Misc > FakeSMC HWMonitor Application v6.25-333-g05e0f4be.1759
Drivers > Network > Realtek > RealtekRTL8111 v2.2.1
Bootloaders > Clover v2.4k r4173 UEFI Boot Mode <---Quick Start default
Customize > System Definitions > iMac > iMac 14,2 <---Quick Start default
6、use the ssdtPRGen.sh
Code:
curl -o ~/ssdtPRGen.sh [URL]https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh[/URL]
chmod +x ~/ssdtPRGen.sh
~/ssdtPRGen.sh -target 2
~/ssdtPRGen.sh -c 2 -p G3430
When it asks if you want to copy to /Extra just respond 'n'. Same for opening ssdt.dsl... respond 'n'.
The results are at ~/Library/ssdtPRGen/SSDT.aml.
Summary
What Works
everything
What Does Not Work
none