- Joined
- Jul 11, 2011
- Messages
- 75
- Motherboard
- Mac Lion 10.7.4
- CPU
- Intel core i3-2100
- Graphics
- AMD 5450 HD 512 MB
- Mac
- Classic Mac
- Mobile Phone
My specs :
===========
1-Gigabyte GA-H61M-S2V-B3 (Rev1.1) is the same hardware as GA-H61M-D2-B3 (Rev1.1)(D : All solid capacitor design)
2-Core i3-2100 ( intel 2000 hd not working with me)
3-NOW i own ATi PowerColor 5450 HD 512MB (WORKING QE/CL WITH FULL RES/VGA/DVI/HDMI)
4-2*2GB Kingston 1333MHz
5-WD Blue Caviar 500GB
---------------------------
Bios settings:
==========
i used the default settings for this motherboard and added to them
+ IDE>>AHCI
+ HEPT 64
How:
====
::Note:: it's recommended to install fresh lion than upgrading from snowleopard.
1-Flow this tutorial by Gordo74 it's the best: http://www.tonymacx86.com/viewtopic.php?f=168&t=32306
::Notes::
1. for network i used Realtek Gigabit Ethernet 2.0.6 not Lnx2Mac's RealtekRTL81xx Ethernet because Lnx2Mac's RealtekRTL81xx make conflict with my wireless driver.
2. you will get kernel panic when you enter lion without rboot so you have to write At Chimera Boot Screen GraphicsEnabler=No because ati card and audio (with HDMI) aren't installed yet.
3. to install audio you have to use this options in multibeast:
+ system utilities
+ Audio
> Realtek ALC8xx
>> ALC8xxHDA
>>> AppleHDA Rollback
2-Now it's time to install ATi 5450 HD :[Native]
======================================
Add your Device ID to ATi5000controller.kext and ATiReadeonx3000.kext.
(GO to System/Library/Extensions then find one of the above Kexts and show package contents then Contents then add you dev id to info.plist under <key>IOPCIMatch</key> mine is 0x68F91002 ).
Change GraphicsEnabler to Yes.
Delete all ati config and injectors if found.
Don't use patched DSDT.
Working in booth 32/64 bit and VGA.
BOOOM fully recognized ati 5450 512mb and working frame buffer (working dvd player & powerpoint )
----------------------------------------------------------------------------------------------------
3-Working Wireless PCI-e Adapter: TP-Link TL-WN781N (802.11n, 150Mb/s):
==============================================================
Install this kext to System/Library/Extensions LINK>> New Kext http://download1078.mediafire.com/deh1ho1xmxeg/x4pwdtg342d4l1y/IO80211Family.kext.rar
Repair permission through kext utility
Reboot
::Note:: Fully working with Realtek Gigabit Ethernet 2.0.6 in Lion and SnowLeopard also.
4-Sleep - General Troubleshooting Tips :
================================
1. You must have the proper DSDT edits as per this post. All of the Gigabyte DSDTs in the DSDT Database are edited properly for sleep.
2. To enable sleep, make sure to remove NullCPUPowerManagement.kext
3. Make sure you check all of the checkboxes in System Preferences/Energy Saver as shown in the picture below.
4. Make sure your DSDT is named DSDT.aml and found in /Extra folder.
-------------------------------------------------------------------------------
SO after all that what about Intel 2000 HD !?
actually i asked alot of people in this forum and insanely mac
me:what about intel 2000HD?
MacManx86:Chimera has the code for the HD2000 but OS X does not support it. So until Apple supports it or someone comes up with a hacked driver it won't work.
##KEEP THIS IN MIND##
==================
1. Make sure that you have the latest Bios ver with proper DSDT.
2. I suppose you to make additional 20GB partition and backup your installed Mac to it through backup programs so you can test/modify any thing you want and if you bricked your mac you can fix what you have done. [ like CARBON Copy Cloner LINK>>>>http://www.bombich.com/software/download_ccc.php ]
3. After waking up from sleep all connected usb storages ejected by it self .
4. When using a DSDT you need to remove (if found in extra folder):
EvOreboot.kext
LegacyAppleRTC.kext
NullCPUPowerManagement.kext
Also, make sure the the DSDT is named DSDT.aml in /Extra.(MacManx86)
TESTS (say your opinion about these numbers):
==============================
with chimera 1.4.1 and ATi 4670 HD (owned before)
1-Geekbench: score 6682
2-Cinebench
with chimera 1.5.4 and ATi 5450 HD
1-Geekbench:6661
2-Cinebench
===========
1-Gigabyte GA-H61M-S2V-B3 (Rev1.1) is the same hardware as GA-H61M-D2-B3 (Rev1.1)(D : All solid capacitor design)
2-Core i3-2100 ( intel 2000 hd not working with me)
3-NOW i own ATi PowerColor 5450 HD 512MB (WORKING QE/CL WITH FULL RES/VGA/DVI/HDMI)
4-2*2GB Kingston 1333MHz
5-WD Blue Caviar 500GB
---------------------------
Bios settings:
==========
i used the default settings for this motherboard and added to them
+ IDE>>AHCI
+ HEPT 64
How:
====
::Note:: it's recommended to install fresh lion than upgrading from snowleopard.
1-Flow this tutorial by Gordo74 it's the best: http://www.tonymacx86.com/viewtopic.php?f=168&t=32306
::Notes::
1. for network i used Realtek Gigabit Ethernet 2.0.6 not Lnx2Mac's RealtekRTL81xx Ethernet because Lnx2Mac's RealtekRTL81xx make conflict with my wireless driver.
2. you will get kernel panic when you enter lion without rboot so you have to write At Chimera Boot Screen GraphicsEnabler=No because ati card and audio (with HDMI) aren't installed yet.
3. to install audio you have to use this options in multibeast:
+ system utilities
+ Audio
> Realtek ALC8xx
>> ALC8xxHDA
>>> AppleHDA Rollback
2-Now it's time to install ATi 5450 HD :[Native]
======================================
Add your Device ID to ATi5000controller.kext and ATiReadeonx3000.kext.
(GO to System/Library/Extensions then find one of the above Kexts and show package contents then Contents then add you dev id to info.plist under <key>IOPCIMatch</key> mine is 0x68F91002 ).
Change GraphicsEnabler to Yes.
Delete all ati config and injectors if found.
Don't use patched DSDT.
Working in booth 32/64 bit and VGA.
BOOOM fully recognized ati 5450 512mb and working frame buffer (working dvd player & powerpoint )
----------------------------------------------------------------------------------------------------
3-Working Wireless PCI-e Adapter: TP-Link TL-WN781N (802.11n, 150Mb/s):
==============================================================
Install this kext to System/Library/Extensions LINK>> New Kext http://download1078.mediafire.com/deh1ho1xmxeg/x4pwdtg342d4l1y/IO80211Family.kext.rar
Repair permission through kext utility
Reboot
::Note:: Fully working with Realtek Gigabit Ethernet 2.0.6 in Lion and SnowLeopard also.
4-Sleep - General Troubleshooting Tips :
================================
1. You must have the proper DSDT edits as per this post. All of the Gigabyte DSDTs in the DSDT Database are edited properly for sleep.
2. To enable sleep, make sure to remove NullCPUPowerManagement.kext
3. Make sure you check all of the checkboxes in System Preferences/Energy Saver as shown in the picture below.
4. Make sure your DSDT is named DSDT.aml and found in /Extra folder.
-------------------------------------------------------------------------------
SO after all that what about Intel 2000 HD !?
actually i asked alot of people in this forum and insanely mac
me:what about intel 2000HD?
MacManx86:Chimera has the code for the HD2000 but OS X does not support it. So until Apple supports it or someone comes up with a hacked driver it won't work.
##KEEP THIS IN MIND##
==================
1. Make sure that you have the latest Bios ver with proper DSDT.
2. I suppose you to make additional 20GB partition and backup your installed Mac to it through backup programs so you can test/modify any thing you want and if you bricked your mac you can fix what you have done. [ like CARBON Copy Cloner LINK>>>>http://www.bombich.com/software/download_ccc.php ]
3. After waking up from sleep all connected usb storages ejected by it self .
4. When using a DSDT you need to remove (if found in extra folder):
EvOreboot.kext
LegacyAppleRTC.kext
NullCPUPowerManagement.kext
Also, make sure the the DSDT is named DSDT.aml in /Extra.(MacManx86)
TESTS (say your opinion about these numbers):
==============================
with chimera 1.4.1 and ATi 4670 HD (owned before)
1-Geekbench: score 6682
2-Cinebench
with chimera 1.5.4 and ATi 5450 HD
1-Geekbench:6661
2-Cinebench