Contribute
Register

[Success] First Build, Core i5-8400, GA Z370N WIFI, i630, Airport card

Status
Not open for further replies.
I think I have a problem with the usb drive. Did you put it in a USB3 port?

I’m getting a prohibihited sign when the progress bar is loading.
 
b.kind said:
You are on the right track. You are close.

Which version of the BIOS are you running?
Mine is F3, which came with the MB.
You are doing things in the BIOS that I am not doing.

Check out my installation instructions, Step 3, BIOS settings.
The first thing I do is "Load Optimized Defaults", this resets the board back to factory settings.
Then I change only 5 settings, Save and exit.

I never mess with "Boot Options" at all.
I never mention Clover in the BIOS. No need.
Click to expand...
You were right the entire time...at least after further research, all research points to the bios...I was running F10... I would have just thought F10 would be more more user ability.... I just downgraded to F2 (what the board came with) and am going to upgrade it to F3...And then your way should be successful.... it better be, I sure learned a lot and almost got it to boot on F10..
 
Almost a hackintosh
Z370N WIFI |  i7 8700K |  Radeon Other
I read that BIOS versions F4 - F10 are for intel 9th Gen chips - which I do not have, so I ignored them.

Obviously, other people here with the same board are successfully running F10 with High Sierra. I do not know their settings.
 
small white box
Z370N WIFI |  i5 8400 |  HD 630
021EE4C5-BB7A-4697-8FA6-6731B5D3818C.jpeg
b.kind said:
I read that BIOS versions F4 - F10 are for intel 9th Gen chips - which I do not have, so I ignored them.

Obviously, other people here with the same board are successfully running F10 with High Sierra. I do not know their settings.
Click to expand...
Ugh! We were so close!!!

I literally followed your steps to the T. Zero deviation.

All the way down to the BIOS version. Every time it comes to running MultiBeast, as soon as it hits FakeSMC ! Boom! Error!
 
Almost a hackintosh
Z370N WIFI |  i7 8700K |  Radeon Other
P1LGRIM said:
See https://www.tonymacx86.com/threads/multibeast-failure-reporting-v10-and-later.237897/
Click to expand...
  1. macOS version
MacOS High Sierra version 10.13.6
  1. MultiBeast version
Multibeast version High Sierra Edition 10.4.0
  1. MultiBeast choices
MultiBeast
Quick Start > UEFI Boot Mode
Drivers > Network > Intel > IntelMausiEthernet v2.4.0
Customize >Graphics > Intel HD 6xx

Build - shows your selections, and adds 3 more.
  1. Destination files system type, HFS+ or APFS
Destination Samsung NVME APFS
  1. MultiBeast.log contents

  1. install.log contents for the choices that you are installing

Log contents are found in the Console application

~/Library/Logs/MultiBeast.log
11/14/18 22:40:50 - Starting MultiBeast 10.4.0-20180812
11/14/18 22:43:04 - Installing 'Bootloaders > Clover UEFI Boot Mode'
11/14/18 22:43:08 - Installing 'BootVolume'
11/14/18 22:43:08 - Mounting EFI at destination 'SamsungNVME'
11/14/18 22:43:08 - Installing 'Drivers > Misc > FakeSMC'
11/14/18 22:43:10 - Install of '/Applications/MultiBeast.app/Contents/Resources/FakeSMC-v6.26-344-g1cf53906.1787.pkg' failed.
'installer: Package name is FakeSMC-v6.26-344-g1cf53906.1787
installer: Installing at base path /
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.
11/14/18 23:07:00 - Installing 'Bootloaders > Clover UEFI Boot Mode'
11/14/18 23:07:05 - Installing 'BootVolume'
11/14/18 23:07:05 - Mounting EFI at destination 'SamsungNVME'
11/14/18 23:07:05 - Installing 'Drivers > Misc > FakeSMC'
11/14/18 23:07:07 - Install of '/Applications/MultiBeast.app/Contents/Resources/FakeSMC-v6.26-344-g1cf53906.1787.pkg' failed.
'installer: Package name is FakeSMC-v6.26-344-g1cf53906.1787
installer: Installing at base path /
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.
11/14/18 23:10:12 - Installing 'Bootloaders > Clover UEFI Boot Mode + Emulated NVRAM'
11/14/18 23:10:17 - Installing 'BootVolume'
11/14/18 23:10:17 - Mounting EFI at destination 'SamsungNVME'
11/14/18 23:10:17 - Installing 'Drivers > Misc > FakeSMC'
11/14/18 23:10:19 - Install of '/Applications/MultiBeast.app/Contents/Resources/FakeSMC-v6.26-344-g1cf53906.1787.pkg' failed.
'installer: Package name is FakeSMC-v6.26-344-g1cf53906.1787
installer: Installing at base path /
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.
11/14/18 23:13:51 - Starting MultiBeast 9.2.1-20180221
11/14/18 23:14:24 - Installing 'Bootloaders > Clover v2.4k r4173 UEFI Boot Mode'
11/14/18 23:15:15 - Installing 'BootVolume'
11/14/18 23:15:15 - Mounting EFI
11/14/18 23:15:15 - Installing 'Drivers > Misc > FakeSMC v6.25-333-g05e0f4be.1759'
11/14/18 23:15:18 - Installing 'Drivers > Network > Intel > IntelMausiEthernet v2.3.0'
11/14/18 23:15:20 - Installing 'Drivers > Graphics > Intel HD 6xx'
11/14/18 23:15:22 - Install of '/private/var/folders/jz/rcjm8r1n2jq3b1kjc8z18h4r0000gn/T/AppTranslocation/A976CBEF-7A01-4CFF-8C86-F75387FE3BF5/d/MultiBeast.app/Contents/Resources/Clover-HD6xx-Graphics.pkg' failed.
'installer: Package name is Clover-HD6xx-Graphics
installer: Installing at base path /Volumes/Install macOS High Sierra
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.
11/14/18 23:16:26 - Starting MultiBeast 9.2.1-20180221
11/14/18 23:16:46 - Starting MultiBeast 10.4.0-20180812
11/14/18 23:17:13 - Installing 'Bootloaders > Clover UEFI Boot Mode'
11/14/18 23:17:18 - Installing 'BootVolume'
11/14/18 23:17:18 - Mounting EFI at destination 'SamsungNVME'
11/14/18 23:17:18 - Installing 'Drivers > Misc > FakeSMC'
11/14/18 23:17:19 - Install of '/Applications/MultiBeast.app/Contents/Resources/FakeSMC-v6.26-344-g1cf53906.1787.pkg' failed.
'installer: Package name is FakeSMC-v6.26-344-g1cf53906.1787
installer: Installing at base path /
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.


/var/log/install.log

UPLOADED FILE; Readme.txt
 

Attachments

  • readme.txt
    1.3 MB · Views: 180
Almost a hackintosh
Z370N WIFI |  i7 8700K |  Radeon Other
Danoldo said:
Ugh! We were so close!!!

I literally followed your steps to the T. Zero deviation.

All the way down to the BIOS version. Every time it comes to running MultiBeast, as soon as it hits FakeSMC ! Boom! Error!
Click to expand...

We will make this work. You are really close.
Might be you need the older version of MultiBeast? If so, I can mail it to you.
Can you post a screen grab of MultiBeast right before you click "install"?

Let's review your hardware. You have:
GA-z370n WIFI, 16 GB RAM, and no graphics card.
What kind of internal storage are you using?
 
small white box
Z370N WIFI |  i5 8400 |  HD 630
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top