- Joined
- Aug 15, 2012
- Messages
- 14
- Motherboard
- Gigabyte Z390 Designare
- CPU
- i9 9900k
- Graphics
- RX 570
- Mac
I have successfully installed ML onto my system! It is running perfectly with audio, networking, and iCloud functioning as they should. It is rock solid!
I used @ScAwN7 bios settings as mentioned:
Sata Mode: AHCI
JMB362 Sata Controller: Enabled
JMB363 Sata/Pata Controller: Enabled
JMB363 Mode: AHCI
JMB362 Mode: AHCI
ACPI Suspend: S3
Run VGA Bios if S3 Resume: No
Soft-Off by PWRBUTTON: Instant off
Wake up by PCI card: Disable
USBKB Wakeup from S3: Enabled
PWRON after pwr failure: On
And used @JeffRH multibeast settings since my previous attempts failed to boot:
1. EasyBeast
2. PCI Root ID Fix
3. Lnx2Mac's RealtekRTL81xx Ethernet v0.0.90
4. Realtek ALC8xx-Without DSDT-ALC889
5. Trim Enabler
Thanks for everyones input and help, I REALLY appreciate it a lot!
I used @ScAwN7 bios settings as mentioned:
Sata Mode: AHCI
JMB362 Sata Controller: Enabled
JMB363 Sata/Pata Controller: Enabled
JMB363 Mode: AHCI
JMB362 Mode: AHCI
ACPI Suspend: S3
Run VGA Bios if S3 Resume: No
Soft-Off by PWRBUTTON: Instant off
Wake up by PCI card: Disable
USBKB Wakeup from S3: Enabled
PWRON after pwr failure: On
And used @JeffRH multibeast settings since my previous attempts failed to boot:
1. EasyBeast
2. PCI Root ID Fix
3. Lnx2Mac's RealtekRTL81xx Ethernet v0.0.90
4. Realtek ALC8xx-Without DSDT-ALC889
5. Trim Enabler
Thanks for everyones input and help, I REALLY appreciate it a lot!