[SUCCESS] blouse's "Hack Pro" :: i9-9900K + Z390 Aorus Pro + Vega 64 + TB3 + USB3 :: 100% working

[psedog]

Yeah... I Know it!
But unfortunatelly it doesn’t appears!
I can’t create this list, but my HD’s are there!
I wanna know if someone knows how to do this!

Have you tried reseting to defaults via the "Save & Exit" tab?

 

[AndrezinhoCosta]

In your BIOS, you should change "Windows 8/10" to "Other OS." under "Chipset" in your BIOS, do you have "Vt-d" disabled? It hould be. If I had this problem, I would use Gigabyte's "Q-flash" to re-flash my F8 BIOS.

Of course! The photo was take after ahhhnnn... near 3000 times trying change different BIOS...

 

[AndrezinhoCosta]

Have you tried reseting to defaults via the "Save & Exit" tab?

Yeah... Tryed it too...

 

[AndrezinhoCosta]

My Boot Options: only USB.
My HD's in SATA options: 4!!!
I'll flash F8 BIOS again now...

 

[AndrezinhoCosta]

@AndrezinhoCosta
Can you please give us your EFI to analyze?

Or if you do not want that, can you give some tips, how to install High Sierra on CL with i9-9900K ?

It's here...

 

[AndrezinhoCosta]

Flash... And nothing of my HD's...

 

[AndrezinhoCosta]

Options for BIOS!
And boot with pendrive.
When I opened Shell, I've discover that my keyboard ABNT2 don't answer with ":" and I don't know how got it with my keyb...
KKKKKKKKKK

 

[AndrezinhoCosta]

@AndrezinhoCosta did you recently update the BIOS? Recently as I was trying a few different BIOS versions, this happened to me. The fix is outlined here (in the third post):

[Solved] UEFI clover boot option gone after BIOS update

Following fixing a different issue, where Clover was making a new UEFI boot drive every time I restarted (causing 20+ boot drives in bios), my issues have gone the other way. I updated BIOS to F20, and no longer see any UEFI drives to go to clover in the BIOS setup - only the two drives in the...

www.tonymacx86.com

Perhaps this will be helpful. I hope so!

Caaaaaaaaraaaa!!!!
By the love of Szevers and all the gods of Byteshuria!!!
It works!!!!

Uhuuuuuuuuuuu!!!!!

☺

You're lucky in live in other country! If you was in Rio, I would kiss you!

 

[AndrezinhoCosta]

Ok... Talked too early!
Now, I can see all the HD's but the USB doesn't show [UEFI], and stops in the boot!
Freeze...

 

[Mark Quark]

I looked at your EFI, it's a bit strange. Have both drivers, apfs.efi and ApfsDriverLoader-64.efi. It is needed I think only ApfsDriverLoader-64. I miss FakeSMC.kext or VirtualSMC.kext. No idea how this works for you
Whether you have FakeSMC.kext in the System?
Because of ++++, You use OsxAptioFix2Drv-free2000.efi, and mostly that's OK, test this time AptioMemoryFix-64.efi, or others. Or do in the Clover menu F11. Add to that EmuVariableUefi-64.efi.
Clover ACPI SECTION - None Patches, completely empty.
...