[Success] ASRock Z390 Phantom Gaming-ITX + TB3 + iGPU + Mojave + SFF Build

[bartrap]

Hi Guys; Am joining your thread and reading around....
I have an ASRock Z390 Extreme board BIOS 4.2 running for quite some time now on Mojave 10.14.6. Very stable and recently, because I have work with Universal Audio equipment, I purchased an Asrock Thunderbolt 3 AIC r2.0 card. Would somebody be willing to help me make it work ? I would really appreciate not having to redo my whole system again as I have so many projects running on it....

 

[fontanero]

Hello everybody, I leave you my configuration running Big Sur 11.0.1 and OpenCore 0.6.4

It works very well for me including TB, remember to put your serial number and UUID

Greetings to all

 

[Joshmo]

Hi Guys; Am joining your thread and reading around....
I have an ASRock Z390 Extreme board BIOS 4.2 running for quite some time now on Mojave 10.14.6. Very stable and recently, because I have work with Universal Audio equipment, I purchased an Asrock Thunderbolt 3 AIC r2.0 card. Would somebody be willing to help me make it work ? I would really appreciate not having to redo my whole system again as I have so many projects running on it....

I'm only a lowly user here but I'd suggest getting TB up and running on Windows first - updating firmware as necessary - then once you're satisfied that all's well copy the TB settings from the first page as far as possible.

 

[bartrap]

Thank you I will try that now...

 

[matj]

Hello everybody, I leave you my configuration running Big Sur 11.0.1 and OpenCore 0.6.4

It works very well for me including TB, remember to put your serial number and UUID

Greetings to all

I got this error after reboot from an upgrade from catalina to Big Sur, it worked for the first time after installation, any idea how to fix it?

ocb startimage failed - aborted

Perhaps related to I have booted into windows on the second drive.

 

[fontanero]

I got this error after reboot from an upgrade from catalina to Big Sur, it worked for the first time after installation, any idea how to fix it?

Perhaps related to I have booted into windows on the second drive.

Everything went well, I don't have windows installed, just Big Sur, sorry I can't help

 

[Joshmo]

It's really not recommended to use OC to dual boot Windows - though whether that's connected to your particular issue no idea. The latest Clover now incorporates OC - maybe try using that? Caveat - not upgraded to this version yet as I have no need currently so no clue how well it works.

 

[matj]

Thanks for the response to my situation, finally I managed to use the following repo in order to use both Big Sur and Windows together.

https://github.com/fangf2018/ASRock-Z390-Phantom-ITX-OpenCore-Hackintosh/blob/master/README.md

See if it may help to further enhance the OC configuration.

 

[fangf2018]

Thanks for the response to my situation, finally I managed to use the following repo in order to use both Big Sur and Windows together.

https://github.com/fangf2018/ASRock-Z390-Phantom-ITX-OpenCore-Hackintosh/blob/master/README.md

See if it may help to further enhance the OC configuration.

There's nothing special about it

 

[matj]

@fangf2018 Honestly I have no idea to spot the differences, while I guess maybe related to boot options? Perhaps related to NVRAM too.

When I get back to the mac OS, I checked the startup drive in the setting and I found that no disk is selected there, so maybe it is the reason for not booting up?

Thanks for your repo btw