- Joined
- Oct 3, 2017
- Messages
- 11
- Motherboard
- Gigabyte GA-H270-Gaming 3
- CPU
- i5-7400
- Graphics
- Internal
Hi there,
Not completely new to the community, as I've done my first successful build about four years ago. Decided I needed to completely upgrade system using all hardware noted in my profile (and below). Here's my issue:
I downloaded unibeast onto my USB as directed, along with Sierra install and Multibeast for Sierra. When I boot from the USB, all is well, until I click "Boot MacOS from USB". Once I click that, I just get stuck at this black screen with the Apple Logo
I've tried other USB ports (on my case and on my MOBO), I double-checked my bios settings noted below, and tried booting in safe mode which doesn't work. Seems as if my USB ports are completely powering off when I get to this point.
Hardware:
Gigabyte GA-H270-Gaming 3
i5 7400 7th gen processor
Ballistix 16GB (8x2) DDR4 2400 MT/s
Internal Graphics
Corsair 550m power
BIOS settings:
Step 1= Load Optimised Default
Step 2= IN BIOS Tab
All help is appreciated!!
Not completely new to the community, as I've done my first successful build about four years ago. Decided I needed to completely upgrade system using all hardware noted in my profile (and below). Here's my issue:
I downloaded unibeast onto my USB as directed, along with Sierra install and Multibeast for Sierra. When I boot from the USB, all is well, until I click "Boot MacOS from USB". Once I click that, I just get stuck at this black screen with the Apple Logo
I've tried other USB ports (on my case and on my MOBO), I double-checked my bios settings noted below, and tried booting in safe mode which doesn't work. Seems as if my USB ports are completely powering off when I get to this point.
Hardware:
Gigabyte GA-H270-Gaming 3
i5 7400 7th gen processor
Ballistix 16GB (8x2) DDR4 2400 MT/s
Internal Graphics
Corsair 550m power
BIOS settings:
Step 1= Load Optimised Default
Step 2= IN BIOS Tab
- Windows 8/10 Features = Other OS
- Storage Boot Option Control = UEFI
- Initial Display Output = IGFX
- XHCI Handoff = Enabled (In USB Configuration)
- VT-D = Disabled
- Internal Graphics = Enabled
All help is appreciated!!
Last edited: