- Joined
- Jun 13, 2020
- Messages
- 4
- Motherboard
- Mobile Intel GME965 Express Chipset with ICH8M, 800 MHz front side bus
- CPU
- Intel Core 2 Duo Processor T5870
- Graphics
- Mobile Intel Graphics Media Accelerator X3100
Dear Experts,
I have old laptops and I've tried to install Mavericks on it and it appeared success like a charm using UniBeast.
Now the problem is After I did minimal installation of MultiBeast (just the bootloader) then after that I got stuck at
**AppleSMBusPCI::start failed to get acpi path for provider
MultiBeast Minimal Installation
Chimera Bootloader
Basic BootOptions
Kernel_Cache
Also I was tried to install Chimera BootLoader only and it still get stuck.
I was trying several boot options but none of them are worked.
-v -x
-v -x -f npci=0x3000
-v -x -F npci=0x3000 GraphicsEnabler=NO
-v -x npci=0x2000
My Specs:
HP Compaq CQ510 Core2Duo
INTEL 965 GME (Driver)
If I'm not installing anything from MultiBeast and tried to boot using UniBeast and point to the HD where I Installed Mavericks it works
even without any custom boot. the problem always happen after I MultiBeast installation.
Any suggestion to fix my problem?
thank you in advance.
I have old laptops and I've tried to install Mavericks on it and it appeared success like a charm using UniBeast.
Now the problem is After I did minimal installation of MultiBeast (just the bootloader) then after that I got stuck at
**AppleSMBusPCI::start failed to get acpi path for provider
MultiBeast Minimal Installation
Chimera Bootloader
Basic BootOptions
Kernel_Cache
Also I was tried to install Chimera BootLoader only and it still get stuck.
I was trying several boot options but none of them are worked.
-v -x
-v -x -f npci=0x3000
-v -x -F npci=0x3000 GraphicsEnabler=NO
-v -x npci=0x2000
My Specs:
HP Compaq CQ510 Core2Duo
INTEL 965 GME (Driver)
If I'm not installing anything from MultiBeast and tried to boot using UniBeast and point to the HD where I Installed Mavericks it works
even without any custom boot. the problem always happen after I MultiBeast installation.
Any suggestion to fix my problem?
thank you in advance.
Last edited: