- Joined
- Sep 26, 2016
- Messages
- 208
- Motherboard
- Gigabyte Aorus z390 Elite
- CPU
- i7-9700K
- Graphics
- Vega 64
- Mac
- Mobile Phone
Give this a shot.Having little success uploading this. I'll try one more time. Thanks for your help.
Give this a shot.Having little success uploading this. I'll try one more time. Thanks for your help.
Give this a shot.
You had a lot of things wrong in your config, try this whole EFI on a USB drive, do not add or change anything. If you have issues booting please boot into verbose and take a picture and upload it here so I can see what the issue is.Having little success uploading this. I'll try one more time. Thanks for your help.
o M.I.T.>Advanced Frequency Settings>Extreme Memory Profile (X.M.P.): Profile1
o BIOS Features>Windows 8 Features: Windows 8
o BIOS Features>CSM Support: Never
o Peripherals>EHCI Hand-off: Enabled
You had a lot of things wrong in your config, try this whole EFI on a USB drive, do not add or change anything. If you have issues booting please boot into verbose and take a picture and upload it here so I can see what the issue is.
First load into your BIOS and F7 to Load Defaults, then reboot and go back into BIOS then make these changes:
Code:o M.I.T.>Advanced Frequency Settings>Extreme Memory Profile (X.M.P.): Profile1 o BIOS Features>Windows 8 Features: Windows 8 o BIOS Features>CSM Support: Never o Peripherals>EHCI Hand-off: Enabled
You had a lot of things wrong in your config, try this whole EFI on a USB drive, do not add or change anything. If you have issues booting please boot into verbose and take a picture and upload it here so I can see what the issue is.
First load into your BIOS and F7 to Load Defaults, then reboot and go back into BIOS then make these changes:
Code:o M.I.T.>Advanced Frequency Settings>Extreme Memory Profile (X.M.P.): Profile1 o BIOS Features>Windows 8 Features: Windows 8 o BIOS Features>CSM Support: Never o Peripherals>EHCI Hand-off: Enabled
No problem, happy hacking. The reason your iCloud required new password was because you were using the wrong SMBIOS, Z97 and 4790K should be using iMac15,1 not iMac14,2.Well, what can I say? You're a genius. It worked on the first try after I installed your EFI folder and implemented your BIOS changes. Apple locked my account and made me change my iCloud password and re-enter it in 50 different locations, but that's a small price to pay. All three monitors are back and working perfectly. All services are working that I can tell. My computer even booted faster than it did before.
Seriously, I can't thank you enough. I've been pretty handy at solving my Hackintosh problems over the years, but your skills are entirely next level. Many thanks!
No problem, happy hacking. The reason your iCloud required new password was because you were using the wrong SMBIOS, Z97 and 4790K should be using iMac15,1 not iMac14,2.
iMessage only requires working NVRAM doesn't matter the SMBIOS, which you have now since I gave you AptioMemoryFix. Sleep/Wake will not work unless you patch your DSDT.It's been so long now, I forgot why I was using 14,2, but it was to get something working, I remember that. I think it might even have been iMessage and the other iCloud services. (They were working fine for a very long time with 14,2 as my setting.)
I've never had sleep work properly for me, either. I think I will give that a go now, too!
Thanks again.
iMessage only requires working NVRAM doesn't matter the SMBIOS, which you have now since I gave you AptioMemoryFix. Sleep/Wake will not work unless you patch your DSDT.
Same here, please mark this thread as SolvedOK, thanks. I won't bother with sleep. I've let the machine run 24/7 for two years now, only sleeping the monitors. No need to change that now.