- Joined
- Jan 11, 2011
- Messages
- 9
- Motherboard
- OSx - Win7
- CPU
- Intel i7 2600k @ 4,00 ghz
- Graphics
- ATI Radeon 6850 1GB
- Mac
- Classic Mac
- Mobile Phone
Hello to everyone,
First of all i'm sorry if my english is not good. I'm Italian!!!
I've decided to build a Hackintosh with clean Lion Installation following Unibeast Method and the Gordo's guide linked here viewtopic.php?f=168&t=32306.
So first of all i bought the hardware listed in Gordo's guide:
GA-Z68X-UD3H-B3 – Bios: F10 (and not F9) – Rev. 1.3
i5 2500K i bought i7 2600k
16GB (4x4GB) DDR3 1600 RAM – G.Skill Ripjaws
ATI 6870 – XFX HD-687A-ZHFC (Also works with Gigabyte GV-R687OC-1GD) - i bought Gigabyte card.
Crucial C300 64GB SSD I bought 2 (one for winodws 7 and one for lion).
After this i've downloaded via AppStore the Lion (directly the 10.7.2 version).
I.ve followed the unibeast guide http://tonymacx86.blogspot.com/2011/10/ ... using.html only for build the usb Drive.
After assembling the hardware and installing win 7 i tried to configure osX:
i set the bios in ahci mode for Hard Disk and Hpet 64 bit.
I remove the ram module (I left only 4GB) and i remove also the other peripherals (i left only 1 ocz for osx.
The system start, i select usb drive and chimera start.
i press enter, apple logo appear and in a few second the screen go black (no video input)
I reset the system and at the the chimera screen i type GraphicsEnabler=NO (for non compatible card i read) and Lion Installer start!!!
After 20 minutes the "successful" message appears and the system reboot.
I boot with unibeast et at the chimera screen i select Lion drive (ocz) with GE=No option.
The system starts: i configure lion, i open Finder and from the usb drive i copy to the desktop the file DSDT/Database/DSDT-GA-Z68X-UD3H-B3-F10.aml renamed simply to "DSDT.aml"
I ran Mulibeast Version 4.2.1 and i check the options that are listed in the Gordo's guide but when i tap "continue" after a minute the system crash!!!
Now i'm in trouble!!!!
Someone can help me please?????
Thank you very much in advance.
First of all i'm sorry if my english is not good. I'm Italian!!!
I've decided to build a Hackintosh with clean Lion Installation following Unibeast Method and the Gordo's guide linked here viewtopic.php?f=168&t=32306.
So first of all i bought the hardware listed in Gordo's guide:
GA-Z68X-UD3H-B3 – Bios: F10 (and not F9) – Rev. 1.3
i5 2500K i bought i7 2600k
16GB (4x4GB) DDR3 1600 RAM – G.Skill Ripjaws
ATI 6870 – XFX HD-687A-ZHFC (Also works with Gigabyte GV-R687OC-1GD) - i bought Gigabyte card.
Crucial C300 64GB SSD I bought 2 (one for winodws 7 and one for lion).
After this i've downloaded via AppStore the Lion (directly the 10.7.2 version).
I.ve followed the unibeast guide http://tonymacx86.blogspot.com/2011/10/ ... using.html only for build the usb Drive.
After assembling the hardware and installing win 7 i tried to configure osX:
i set the bios in ahci mode for Hard Disk and Hpet 64 bit.
I remove the ram module (I left only 4GB) and i remove also the other peripherals (i left only 1 ocz for osx.
The system start, i select usb drive and chimera start.
i press enter, apple logo appear and in a few second the screen go black (no video input)
I reset the system and at the the chimera screen i type GraphicsEnabler=NO (for non compatible card i read) and Lion Installer start!!!
After 20 minutes the "successful" message appears and the system reboot.
I boot with unibeast et at the chimera screen i select Lion drive (ocz) with GE=No option.
The system starts: i configure lion, i open Finder and from the usb drive i copy to the desktop the file DSDT/Database/DSDT-GA-Z68X-UD3H-B3-F10.aml renamed simply to "DSDT.aml"
I ran Mulibeast Version 4.2.1 and i check the options that are listed in the Gordo's guide but when i tap "continue" after a minute the system crash!!!
Now i'm in trouble!!!!
Someone can help me please?????
Thank you very much in advance.