- Joined
- Apr 3, 2013
- Messages
- 30
- Motherboard
- GA-Z370P
- CPU
- I3
- Graphics
- RX580
- Mobile Phone
I'm using @RehabMan 's config_HD4000_1600x900.plist to startup my DV7 Envy 7000 series. I only get as far as the installer. No drives appear in the disk utility.
What am I doing wrong? I tried the SATA fix in clover, but that did nothing. Any ideas?
EFI/Clover attached.No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
EFI/Clover attached.
I did it now but, I don't think it did anything. Try this one.No misc/preboot.log. You forgot to press F2. Please read "Problem Reporting" again. Carefully.
I did it now but, I don't think it did anything. Try this one.
0:101 0:000 PCI (00|00:1F.02) : 8086 282A class=010400
By the way that same config boots into Yosemite just fine. However, I can't see any drives with Sierra.I did it now but, I don't think it did anything. Try this one.
By the way that same config boots into Yosemite just fine. However, I can't see any drives with Sierra.
Awesome! Thanks! Sorry , I did not see this before I wrote again. I will try the KEXT!Your preboot.log shows your SATA controller in RAID mode:
Code:0:101 0:000 PCI (00|00:1F.02) : 8086 282A class=010400
Change to AHCI or read relevant part of the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
Yup that fixed it! Thanks a million man.Your preboot.log shows your SATA controller in RAID mode:
Code:0:101 0:000 PCI (00|00:1F.02) : 8086 282A class=010400
Change to AHCI or read relevant part of the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/