- Joined
- Jan 2, 2018
- Messages
- 8
- CPU
- i5-3470
- Graphics
- NVIDIA 1030
Please help me before I throw this bloody thing out of the window. I've already spent many, many hours searching other posts and trying to make it work, but I don't seem to be getting anywhere.
I'm new to this so please forgive any stupid questions.
Hardware:
Dell 9010 (small for factor)
Nvidia 1030 (because onboard graphics aren't compatible)
i5-3470
Problem
I've created a USB installer using the latest Unibeast and a copy of High Sierra on my MacBook. Unibeast says I created it successfully and it seems in order.
I've set the BIOS to all the recommended settings: ACHI, safe mode disabled, USB3.0 disabled, VTd disabled and so on. The Clover boot loader fires up and (following advice from other treads) I've added a -x to boot into safe mode (necessary for this hardware apparently).
The system hangs before I even get the High Sierra install. One of two things happens:
- if I have Nvidia web drivers disabled it just restarts
- with Nvidia web drivers still enabled it hangs after about 10 seconds. See first attachment for details using verbose mode.
Please help - what can I do? Clover file from USB stick attached.
One more thing: I'm not sure whether it's related, but before the Clover bootloader starts I get half a page of errors. None of it means anything to me, but perhaps it does to you chaps. (see second picture).
Appreciate any help anyone can offer.
I'm new to this so please forgive any stupid questions.
Hardware:
Dell 9010 (small for factor)
Nvidia 1030 (because onboard graphics aren't compatible)
i5-3470
Problem
I've created a USB installer using the latest Unibeast and a copy of High Sierra on my MacBook. Unibeast says I created it successfully and it seems in order.
I've set the BIOS to all the recommended settings: ACHI, safe mode disabled, USB3.0 disabled, VTd disabled and so on. The Clover boot loader fires up and (following advice from other treads) I've added a -x to boot into safe mode (necessary for this hardware apparently).
The system hangs before I even get the High Sierra install. One of two things happens:
- if I have Nvidia web drivers disabled it just restarts
- with Nvidia web drivers still enabled it hangs after about 10 seconds. See first attachment for details using verbose mode.
Please help - what can I do? Clover file from USB stick attached.
One more thing: I'm not sure whether it's related, but before the Clover bootloader starts I get half a page of errors. None of it means anything to me, but perhaps it does to you chaps. (see second picture).
Appreciate any help anyone can offer.