Quick Sync hardware encode w/ nVideo card as primary

[shijan]

This is example for additional options in "Arbitrary" section. You can add them only if kext autodetect something wrong or if you want to output video from Intel video card.

 

[rokdrgo]

Next you need to Inject Intel HD device-id with new "Arbitrary" method to config.plist.
- Clover Configurator UI is not updated yet to use this method so you need to open config.plist in plist editor or text editor and add this code to Devices area manually.
- Values of parameters in Arbitrary written down by byte backwards. For example: 0166000B in Arbitrary should be written as 0B006601.
- Do not leave empty Value lines in Arbitrary. If some parameter is not required, then delete the entire section with this parameter!
Note that device-id below is only for Intel HD630 Coffee Lake/Kaby Lake. For other systems and iGPUs you need use different device-id and more additional patches. can find more info at dedicated forum discussions.

How can I find the right values for me. I've an Intel 7700 3.6 GHz and an Asus Strix z270H.
I've already injected the kexts but MacX doesn't show a change

 

[rokdrgo]

I made it! Thank you so much.
Just one more thing. Is't normal that my RAM uses 10GB since start up? I've 24GB and before activating iGPU it only used 3 or 4GB.

 

[shijan]

your CPU have same Intel HD Graphics 630, so just use same code as in manual.
Half memory size It is a common problem. Search in this forum.

 

[shijan]

Here is also my config.plist example file with Arbitrary edit and empty SMBIOS

 

[rokdrgo]

Thank you, i've compared and there isn't much difference.
Configurations I found different

System Parameters> Nvidia Web > Checked
GUI > Text Only > Uncheck
Devices > USB > Inject > Checked
Boot > Arguments >Verbose > unchecked
Boot > Debug > Checked

That's the configuration I've

Also, which kexts are you using?
I got 3
IntelGraphicsFixup 1.2.7
Lilu 1.2.4
NvidiaGraphicsFixup 1.2.7

Again, thank you for your support

 

[shijan]

Thank you, i've compared and there isn't much difference.
Configurations I found different
System Parameters> Nvidia Web > Checked
GUI > Text Only > Uncheck
Devices > USB > Inject > Checked
Boot > Arguments >Verbose > unchecked
Boot > Debug > Checked
Again, thank you for your support

I can suggest uncheck Boot > Debug it slows down boot time and needed only when you search problems during installation.

 

[shijan]

And Clover Configurator 5.1.3.1 now supports "Arbitrary" edit in "Devices" tab

 

[rokdrgo]

I can suggest uncheck Boot > Debug it slows down boot time and needed only when you search problems during installation.

Thank you for the recommendation. One more doubt, do you have your real SMBIOS blank?

 

[shijan]

One more doubt, do you have your real SMBIOS blank?

It is better to generate SMBIOS and mac model in Clover Configurator according to your hardware.