Contribute
Register

Quadro K600 graphics card at Newegg - $39.99

Status
Not open for further replies.
It's a DIY iMac 5K Monitor with the LG Ultrafine 5K screen and the iMac case with a driver board.
I'll need to plug the monitor with 2 display port for the 5K.

I am thinking to buy a K2000, K4200 or AMD RX570?
Does the RX570 have the 10 bit?
 
Last edited:
Just bought a k600 from eBay but am unable to get 4k60 on my TV.

I have tried using an active DP to HDMI2.0 adapter and also a DVI to HDMI adapter.

but both cables only support up to 3840x2160 @30Hz

i already have Lilu and WEG installed....pls help me get 60Hz?
 
macburner said:
but both cables only support up to 3840x2160 @30Hz
Click to expand...
You need a cable that supports 60Hz. Which adapter did you buy ? Post a link.
 
Last edited:
The HDMI cable I used supports 18Gbps so 4k60 should work.

Is there anything else to enable in Clover?
 
macburner said:
The HDMI cable I used supports 18Gbps so 4k60 should work.

Is there anything else to enable in Clover?
Click to expand...
Which adapter did you buy ? Post a link.
 
I have tried turning on and off Ultra Deep Color on my LG TV.
When it’s on I can get 4k30 with Overscan on in System Pref Displays
 
macburner said:
I have tried turning on and off Ultra Deep Color on my LG TV.
Click to expand...
Does it specifically say in the menu HDR ? I don't think Ultra Deep Color is the same as HDR.
What is the model year of the TV ?
 
I just noticed this in the Xlent product description.

Notice: If display device is with HDMI 1.4, our adapter will only support 4K@30Hz; adapter's chip is Single Streamed, which means if PC's Graphics Card is Multiple Streamed, the resolution will only be up to 4K@30Hz;

If you can still return it I would try the Plugable adapter. $13.95 with a coupon on Amazon right now. Great deal.
It's not HDMI 2.0b which is needed for HDR enabled TVs.

Screen Shot 6.jpg
 
Last edited:
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top