PSU Part question? Need Help finding part.

[eelhead]

OK so here are the pics with it apart
The power socket was attached to the three slots at the bottom where its broke and the switch was at the vertical slots towards the top.

Close up

And back side

ok no wires anymore

and now the blue box thing.

The two long wires off the switch connect to this plug, I don't know what that is.

And of course these are the connections from the power socket L & N

And an over view of the PSU.. On the left the white plug is there and on the right is were the L & N plugs are with the yellow glue.

Any help on a solution would be much appreciated!!!!!

here is a link to all the photos
http://s1120.photobucket.com/albums/l499/eelhead01/Hackintosh/PSU/

 

[nikstar]

It looks like the two small wires are for the switch. If you connect them together and plug the other side at the board will stimulate a "switch On".
What you can do to test the PSU is:
- Connect the two thin wires together and plug it in as I said before.
- At the two thick wires supply the AC Power.
It should work like this but I am not 1000% sure as I can only see pictures, I do not have the part in my hand. But I think it should work.
Do not connected to the MB yet. First test it by bridging the green wire with a black one at the ATX connector.

 

[eelhead]

Cool I will. I didn't know that a PSU didn't turn on without it connected to a motherboard or it being jumped lol.

I also got a cool diagram from Gus on this Link to help as well!

I will be using my back up PSU and I can get this working on the side and when it's ready I can finally put it in the G5 mod.