- Joined
- May 9, 2013
- Messages
- 85
- Motherboard
- Gigabyte Z490 v.D
- CPU
- i9-10850K
- Graphics
- RX 580
- Mac
- Classic Mac
- Mobile Phone
Hi,
Asus Z370, i8700K, RX560 video card. EFI and extension pretty much from Pastrychef (THANKS!) latest built. Two monitors (2560x1440) one on DVI and one on DP.
Everything works, BUT I'd like to add a PCIe SATA card. I tried SONNET TSATA6-SSDPS-E2 (two Sata ports and 2 SSD slot) -> It work but when it's in the RX560 loses DVI connectivity. The monitor shows the boot sequence but toward the end of High Sierra boot, both display flash and then the DVI one goes blank. Funny enough the Mac still see that it has two monitors attached with the correct resolution. But the DVI shows black.
I also tried Vantec ST622 which has the ASMedia chip that is supposed to be supported, it starts the BIOS recognizes the card but it crashes while booting macOS. I take it out everything works.
How do I go about debugging the problem?
Thanks
Michele
Asus Z370, i8700K, RX560 video card. EFI and extension pretty much from Pastrychef (THANKS!) latest built. Two monitors (2560x1440) one on DVI and one on DP.
Everything works, BUT I'd like to add a PCIe SATA card. I tried SONNET TSATA6-SSDPS-E2 (two Sata ports and 2 SSD slot) -> It work but when it's in the RX560 loses DVI connectivity. The monitor shows the boot sequence but toward the end of High Sierra boot, both display flash and then the DVI one goes blank. Funny enough the Mac still see that it has two monitors attached with the correct resolution. But the DVI shows black.
I also tried Vantec ST622 which has the ASMedia chip that is supposed to be supported, it starts the BIOS recognizes the card but it crashes while booting macOS. I take it out everything works.
How do I go about debugging the problem?
Thanks
Michele