- Joined
- Apr 4, 2017
- Messages
- 1,131
- Motherboard
- ASUS Z270 ROG MAXIMUS IX HERO
- CPU
- i7-7700K
- Graphics
- Vega 64
- Mac
- Mobile Phone
Yes.Did you restore AppleGVA.framework?
Yes.Did you restore AppleGVA.framework?
Yes.
Thank you! Now I can get past the loading and into the installation, however, none of the internal ssd or hard drive are showing in the installation. (Tried "show all devices" on disk utility, didn't work). Those hard drives show up in BIOS. Any ideas what could help?Try replacing the EFI folder on your USB installer with my EFI folder.
Thank you! Now I can get past the loading and into the installation, however, none of the internal ssd or hard drive are showing in the installation. (Tried "show all devices" on disk utility, didn't work). Those hard drives show up in BIOS. Any ideas what could help?
Sure thing! I mounted the drives manually through Terminal and it worked! Thanks for your guide!I don't know why your drives are to showing. I've never encountered that. What kind of drives do you have installed? I suggest triple checking BIOS settings.
Also, please fill out your profile with your CPU, motherboard, and GPU info so that it's easier for others to help you.
Hi there! I'm having exactly the same problem. No luck finding solution for me at least. Did you manage to fix it?Hey Pastry, it's me again.
Everything seems working fine with your guide. Except that a have sleep / wake problem. When my computer goes to sleep a have to reboot every time. Do you know a guide to fix this problem or there is a quick fix for this?
Thank you so much for your help.
Hmm... When you have time, try booting up in verbose mode and take a picture of where it stops...
pastrychef's Asus ROG Strix Z370-G - i7-8700K - GTX 1080 build...
Hi, hope you remember me from my buying advice post where you advised me on the composers. Everything arrived
View attachment 307422
I followed your Bios settings, used the AMD EFI Folder and now when I boot of the USB, I get stuck directly after the Clover screen here:
View attachment 307421
Any advice?