Optimized AppleHDA for Realtek ALC 887/888b on Lion - Update

[jxelvin]

Tried 887_Lion_AppleHDA-Rev_100302-1 on my GA-H61M-DS2 (Rev2.2) F7, got no luck.
DSDT was set to 287 layout.

Try Audio ID: 887, reply with a copy of IOReg.

After I changed layout id to 887, it worked! Thanks!

 

[dlife01]

Thanks Toleda, but in the meantime I've finally been able to solve my problem. For me it was not obvious which steps to follow in which order, but in the end I succeeded.

For other people, who might be in the same situation, follow the steps below.

1) remove previously installed DSDL from /Extra directory, and remove all previously installed sound-kexts (*HDA*)
2) install AppleHDA rollback from MultiBeast 4.5.1
3) install Non-DSDT HDA enabler ALC887/888b from MultiBeast 4.5.1 (!!)
4) install the kext from the opening post (2a) with Kextbeast

Reboot, and sound works!

Finally this worked when everything else failed !!
You sir and toleda are my new heroes

Got a perfectly working audio on H77-DS3h F4 with ALC887.

This worked for me on Z77-DS3H

THX for your time Toleda !!

 

[theslash]

Thanks Toleda, but in the meantime I've finally been able to solve my problem. For me it was not obvious which steps to follow in which order, but in the end I succeeded.

For other people, who might be in the same situation, follow the steps below.

1) remove previously installed DSDL from /Extra directory, and remove all previously installed sound-kexts (*HDA*)
2) install AppleHDA rollback from MultiBeast 4.5.1
3) install Non-DSDT HDA enabler ALC887/888b from MultiBeast 4.5.1 (!!)
4) install the kext from the opening post (2a) with Kextbeast

Reboot, and sound works!

Finally this worked when everything else failed !!
You sir and toleda are my new heroes

Got a perfectly working audio on H77-DS3h F4 with ALC887.

This worked for me on Z77-DS3H

THX for your time Toleda !!

Hi,
i'm pretty new to the Hackintosh thing...
I have a H77-DS3H and did this as described but i can't turn the volume up, cause when i do the sound cracks.

the sound in itunes ist on full volume but on my connected Speakers i can't turn it up to more than half volume cause then in cracks...any suggestions to that?

 

[pepel13]

Thanks Toleda, but in the meantime I've finally been able to solve my problem. For me it was not obvious which steps to follow in which order, but in the end I succeeded.

For other people, who might be in the same situation, follow the steps below.

1) remove previously installed DSDL from /Extra directory, and remove all previously installed sound-kexts (*HDA*)
2) install AppleHDA rollback from MultiBeast 4.5.1
3) install Non-DSDT HDA enabler ALC887/888b from MultiBeast 4.5.1 (!!)
4) install the kext from the opening post (2a) with Kextbeast

Reboot, and sound works!

Finally this worked when everything else failed !!
You sir and toleda are my new heroes

Got a perfectly working audio on H77-DS3h F4 with ALC887.

This worked for me on Z77-DS3H

THX for your time Toleda !!

Thx a lot! Worked for me too on g41m-es2l f9 v.1,4

I also repaired permission and cache before doing step 2. Finally. no more kp because of voodoohda!!

 

[toleda]

I have a H77-DS3H and did this as described but i can't turn the volume up, cause when i do the sound cracks.

What speaker/speaker system are you using?

 

[theslash]

Its a Creative 2.1 system, about 5 years old...
but it's only connected to the line out jack

 

[toleda]

Update 6/25/2012 -
10.7.4 AppleHDA.kext available in MultiBeast 4.6.0 and newer
Select 887_v100202 or 887_v100302

 

[fabiojansen]

From panel audio problem

Hi guys.

I have an Asus p8h61-m lx and everything works fine, but when i use the Optimized AppleHDA from Multibeast, my front audio panel (headphone) don't is recognized. Is not showing on the audio settings.

Anyone knows how to fix it?

Thanks

 

[toleda]

I have an Asus p8h61-m lx and everything works fine, but when i use the Optimized AppleHDA from Multibeast, my front audio panel (headphone) don't is recognized. Is not showing on the audio settings.

Open System Preferences/Sound/Output. Plug in you headphones to front green jack. What happens to Internal Speakers?

 

[fabiojansen]

I have an Asus p8h61-m lx and everything works fine, but when i use the Optimized AppleHDA from Multibeast, my front audio panel (headphone) don't is recognized. Is not showing on the audio settings.

Open System Preferences/Sound/Output. Plug in you headphones to front green jack. What happens to Internal Speakers?

Hi Toleda.

When i plug the headphones on front green jack, nothing changes (how u can see in the attached file) . I've tested the headphone but no audio. Is only working on the back panel.

There's any way to fix it?

Thanks man