Contribute
Register

NVIDIA GT610 - 10.8.0 -10.8.2 Fix

Status
Not open for further replies.
NVIDIA GT610 - 10.8 Fix

Make sure GraphicsEnabler is turned off and try again. If that doesn't work, then that particular card from that vendor may not work with the kext as provided.

//edit: This was supposed to be a reply to bakerall.
 
HackPro v3.0
GA-Z97-HD3 |  i5 4690K |  GeForce GTX 1080 G1 Gaming
NVIDIA GT610 - 10.8 Fix

At the risk of sounding like a totally clueless board member, what does it mean when people refer to "the OP"?


Thanks,


Namidar
 
NVIDIA GT610 - 10.8 Fix

Confirmed. This works fine on my Giga Z77-DS3H/i5 3750K build. Used the updated kext.
 
NVIDIA GT610 - 10.8 Fix

Thank you - this resolved my crash-upon-boot issue on 10.8 with a GT610.
 
NVIDIA GT610 - 10.8 Fix

Any luck with this and the GT610 2GB version. The kext worked for the 1GB version but now trying with a Galaxy 2GB version and it's not working.

Also, my device ID looks to be the same as in the kext

0x104a


Any ideas?

Thanks so much
 
NVIDIA GT610 - 10.8 Fix

This is the kext from latest OSX 10.8.2 for the new Macs. It has the new 304.10.20f04 drivers from Nvidia. Can someone patch it for me? Thanks
 

Attachments

  • NVDAGF100Hal.kext.zip
    1.5 MB · Views: 349
NVIDIA GT610 - 10.8 Fix

I patched it. So this is patched Nvidia 304 driver for osx 10.8.2

Can you test and report please?

EDIT

I Removed the attachment as it was causing so many issues. Please apologize me.
 
NVIDIA GT610 - 10.8 Fix

Just boot the system with GraphicsEnabler=no and then install the proper Kext for your OSX Version. It should work now.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top