No entry / Prohibited sign when installing Catalina

[FishWu]

Hi everyone,

This is my first time installing Hackinton, and I'm totally being stuck!

I have strictly followed the Buyer's Guide(https://www.tonymacx86.com/buyersguide/building-a-customac-hackintosh-the-ultimate-buyers-guide/）:
CPU: Intel i9 9900k
MOBO: Gigabyte Z390 Gaming x
RAM: Corsair Vengeance 16GBx2 2666Mhz
GPU: Sapphire Radeon RX 5700XT
SSD 1: Samsung 970 EVO 500GB
USB Driver: Kinston 16GB USB 3.0

I followed the instruction of the Installation Guide(https://www.tonymacx86.com/threads/...alina-on-any-supported-intel-based-pc.285366/). here are my BIOS settings:

1. Disable VT-d (Done)
2. Disable CFG-Lock (Not Found)
3. Security Boot Mode (Not Found the same option）
4. Set OS Type to Other OS（Done)
5. Disable IO Serial Port (Not Found)
6. Enable XHCI Handoff (Done)

I can successfully boot into the Clover, but when I select "Install Cataline From USB", it shows Apple icon, which soon becomes a No entry / Prohibited Sign.



Here is clover's log when enabling verbose options (-v) and safe mode （-x））:


The first few lines show error: err(0xe) @ gv boot-signature,
err(0xe) @ gv boot-image-key

My Clover version is 5107. I have attached my EFI folder.

Any help would be great appreciated!!
Thanks!

 

[Feartech]

Hi everyone,

This is my first time installing Hackinton, and I'm totally being stuck!

I have strictly followed the Buyer's Guide(https://www.tonymacx86.com/buyersguide/building-a-customac-hackintosh-the-ultimate-buyers-guide/）:
CPU: Intel i9 9900k
MOBO: Gigabyte Z390 Gaming x
RAM: Corsair Vengeance 16GBx2 2666Mhz
GPU: Sapphire Radeon RX 5700XT
SSD 1: Samsung 970 EVO 500GB
USB Driver: Kinston 16GB USB 3.0

I followed the instruction of the Installation Guide, and here are my BIOS setting:

1. Disable VT-d (Done)
2. Disable CFG-Lock (Not Found)
3. Security Boot Mode (Not Found the same option）
4. Set OS Type to Other OS（Done)
5. Disable IO Serial Port (Not Found)
6. Enable XHCI Handoff (Done)

I can successfully boot the Clover, but when I select "Install Cataline", it shows Apple icon, which soon becomes a No entry / Prohibited Sign.
View attachment 471895


Here is clover's log when enabling verbose options (-v) and safe mode （-x））:
View attachment 471896View attachment 471897

The first few lines show error: err(0xe) @ gv boot-signature,
err(0xe) @ gv boot-image-key

My Clover version is 5107. I have attached my EFI folder.

Any help would be great appreciated!!
Thanks!

add USBInjectAll.kext in clover/kexts/other

try each usb port as well

 

[P1LGRIM]

Please use the search function before creating a new topic. The question that you ask may have already been answered

A common problem, use the forum Search tool to look for 'prohibitory symbol' or 'still waiting for root device'.

 

[FishWu]

A common problem, use the forum Search tool to look for 'prohibitory symbol' or 'still waiting for root device'.

I have searched the forum and I have found some familiar topics such as https://www.tonymacx86.com/threads/...ited-sign-when-installing-high-sierra.254794/. But I'm still can not solve my problem. I'm sorry it may waste your time, but I'm sure I have tried for much time.

 

[Feartech]

I have searched the forum and I have found some familiar topics such as https://www.tonymacx86.com/threads/...ited-sign-when-installing-high-sierra.254794/. But I'm still can not solve my problem. I'm sorry it may waste your time, but I'm sure I have tried for much time.

you missed my reply then?

 

[FishWu]

add USBInjectAll.kext in clover/kexts/other

try each usb port as well

I have added USBInjectAll.kext in clover/kexts/other just now. Unfortuately it doesn't work.
Maybe I should change a USB drive and try again.

 

[FishWu]

you missed my reply then?

I'm sorry for replying late. I'm trying...

 

[FishWu]

add USBInjectAll.kext in clover/kexts/other

try each usb port as well

I have added USBInjectAll.kext in clover/kexts/other, but I forgot to modify the config.plist. I'm searching how to modify it. Maybe it is the key point.

 

[FishWu]

A common problem, use the forum Search tool to look for 'prohibitory symbol' or 'still waiting for root device'.

My problem is like him https://www.tonymacx86.com/threads/...oot-and-gv-awake-failure.294713/#post-2096601.
There is no word like "still waiting for root device", but shows "Err(0xE) 0 GV boot-signature" right after booting.

I still can not find the solution...

 

[tedyun]

My problem is like him https://www.tonymacx86.com/threads/...oot-and-gv-awake-failure.294713/#post-2096601.
There is no word like "still waiting for root device", but shows "Err(0xE) 0 GV boot-signature" right after booting.

I still can not find the solution...

Hi FishWu

I have the same CPU and motherboard. C'mon over to my build thread, and I can help you out:

[SUCCESS] Opus i9 Build: Gigabyte Gaming X Z390 - i9-9900K - Radeon RX 6900 XT Ultimate

tedyun's Opus i9 Build: Gigabyte Gaming X Z390 - i9-9900K - Radeon RX 6900 XT Ultimate Components Gigabyte Gaming X Z390 Motherboard https://www.newegg.com/p/N82E16813145094?Item=N82E16813145094 https://www.amazon.com/dp/B07HRZHJ6Z/?tag=tonymacx86com-20 Intel i9-9900K Coffee Lake Processor...

www.tonymacx86.com

It would be good to keep similar builds in the same thread so that other people can refer to it if putting together the same system.

Ted