No Audio Devices - Realtek ALC AppleHDA [Guide]

[toleda]

I get the error message No audio codec detected...

Post #1, Problem Reporting, attach files.

 

[socrates978]

1. No audio devices appear
2. Yosemite 10.10, Gigabyte z97 Gaming 5, i5 4670k, Nvidia 640
3. Installed Yosemite using Unibeast/multibeast - all worked including audio, but no iMessage. Migrated to clover, audio not working. Ran Yosemite installer again to replace native kext and ran audio_cloverALC-100.command
4. Attached
5. Attached - Edit, doesn't upload for some reason but is in S/L/E and is native Apple kext
6. Not installed
7. No messages
8. Attached
9. audio_cloverALC-100.command says no codec found
10-1 attached
10-2 attached
10-3 not installed
10-4 not installed
11-attached
11-2 attached (DPCIManager)
11-3 not installed
11-4 not installed

Thanks

 

[ste178uk]

For native AppleHDA.kext, run Yosemite installer over existing installation. After restart, run audio_cloverALC-100.command. The script will nut run until your system is correctly configured for OS X audio.

Thanks again, Just have a couple of questions have tried googling and tonymacx86 searching too and struggling to find the answer how do I enable usb 3.0 on clover i'm using ga-z68xp-ud3-issd mb and everything else is now working beautifully (including iMessage & FaceTime after a quick 45minute wait and 20 min call too apple care!), except usb 3.0

I did notice Sound stops after waking from sleep is that a known issue?

 

[toleda]

3. Installed Yosemite using Unibeast/multibeast - all worked including audio, but no iMessage. Migrated to clover, audio not working. Ran Yosemite installer again to replace native kext and ran audio_cloverALC-100.command

5. AppleHDA.kext required. Finder/File/Compress
Verify BIOS/Advanced/Peripherals/Audio Controller/Enabled
IOreg - Chimera or Clover?
config.plist is corrupt; fix and add config.plist/Devices/Audio/Inject/1

 

[socrates978]

5. AppleHDA.kext required. Finder/File/Compress
Verify BIOS/Advanced/Peripherals/Audio Controller/Enabled
IOreg - Chimera or Clover?
config.plist is corrupt; fix and add config.plist/Devices/Audio/Inject/1

See attached Apple HDA
Audio enabled in BIOS
IOreg- Clover I think - how do I confirm? I booted using clover and then ran IOreg
config.plist changed with clover configurator. updated config.plist attached

Thanks

 

[socrates978]

After adding config.plist/Devices/Audio/Inject/1
I ran audio_cloverALC-100.command

Terminal output file is attached.
Restarted computer but still no output devices

 

[toleda]

Restarted computer but still no output devices

Every previous attachment is useless. Your system changed, you reboot; new attachments required.

 

[The RAT]

Hey hackintosh community,

1. The problem is that I have no sound devices under system settings/audio. In the first place (Multibeast installation) it worked though until I changed/installed something with Multibeast.
2. I’m using Yosemite on a Gigabyte Z97X-UD5H, Bios F8 with i5 4690K and a MSI R9 280X.
3. UniBeast: Install OS X Yosemite on Any Supported Intel-based PC

All files should be in attached. Thanks for help
The RAT

 

[toleda]

In the first place (Multibeast installation) it worked though until I changed/installed something with Multibeast.

Installed an audio enabler kext that has not worked since Lion. Remove S/L/E/HDAEnabler?.kext
Install Audio-ID injection, see Post #1, 3. Audio_ID verification/select one method and install

 

[socrates978]

Every previous attachment is useless. Your system changed, you reboot; new attachments required.

Thanks, up to date details and attachments:

1. No audio devices appear
2. Yosemite 10.10, Gigabyte z97 Gaming 5, i5 4670k, Nvidia 640
3. Installed Yosemite using Unibeast/multibeast - all worked including audio, but no iMessage. Migrated to clover, audio not working. Ran Yosemite installer again to replace native kext. Edited config.plist with clover configurator config.plist/Devices/Audio/Inject/1, ran audio_cloverALC-100.command.
4. Attached
5. Attached
6. Not installed
7. No messages
8. Attached
9. attached
10-1 attached
10-2 attached
10-3 not installed
10-4 not installed
11-attached
11-2 attached (DPCIManager)
11-3 not installed
11-4 not installed

Thanks for your help