No Audio Devices - Realtek ALC AppleHDA [Guide]

[toleda]

no codec found

See Problem Reporting, Post #1; attach all requested files

 

[toleda]

assume adding the 0x67 "fixes" the SIP issue, still no joy

Incorrect property name
From: CsrActiveConfig
To: csr-active-config

 

[MexMatt]

Incorrect property name
From: CsrActiveConfig
To: csr-active-config

Toleda, ok, again, i don't understand. I used Clover Configurator.
This is from Post 1,
10.11 and newer

1. SIP: Explaining OS X El Capitan Security Changes - Workarounds and Current Information

following the link, the example says..
<key>RtVariables</key>
<dict>
<key>CsrActiveConfig</key>
<string>0x3</string>

And now my config.plist says..
<dict>
<key>CsrActiveConfig</key>
<string>0x67</string>

So i don't understand what you mean by your comment, that it should be "csr-active-config"?

Should i put...
<dict>
<key>csr-active-config</key>
<string>0x67</string>

If so, why is the example different?

 

[kota1991]

How exactly did you fix the "no codec found" I'm stuck with this right now.
Thanks

I did a codec reset pointed out in III no codec and than step 4.

 

[vm_raja]

No Audio Device
how to fix the
macOS Sieraa 10.12 16A323
Audio ALC892
Installed Kext &
Clover ALC 120 Text
IO Reg
DPCI_Misc

Note : previously working fine at EI Capitain

 

[dturro]

Thank you for all this work Toleda

 

[Swedisch]

Hello, Im also very new to this, please let me know if i missed something. I appreciate the help!

1. No Audio Output/Audio Input Devices Found

- no native applehda.kext found, could not restore it with either os x installer or pacifist, not sure but am i missing something somewhere?

2.osx el capitan 10.11, GA-Z170x-Gaming5, Bios:F5, Intel Core i7, EVGA Geforce GTX950



3. did the multibeast installation afterwards, but still no sound

4. attached;
audio/alc injection: no audio codec detected
verify bios, hardware, etc

5. attaached

6.n/a

7.n/a

8.Tried to filter "sound assertions" in Console/All Messages, found nothing

9./10./12. attached



Thanks

 

[jackblack87]

Same problem.
Copy EFI/CLOVER/kexts/Other/realtekALC.kext to kexts/10.12/
Restart, reply with new IOReg

Weird thing, I had no folder '10.12', found only '10.6' to '10.11' and 'Other'.
I manually created a folder '10.12', copied the file over there, restarted and ran IOReg again as requested. File attached.

Thanks in advance

 

[TheCipher]

Audio is not working.
macOS does not support AC97, means front panel audio ports will not work.
Use Audio ID: 1.
Download codecdetect for the latest version.
MultiBeast 8 does not support Sierra audio.
See Sierra Desktop/Realtek AppleHDA Audio

1)This got my audio working since the 23rd. Now all of a sudden out of the blue not working again. Static. I didn't make any changes or anything to cause this. Weird!!!

2) 10.12, gigabyte z170x-ud5, V5, 17 6700k, GTX 670

3)
1) ALC 1150/100 Series
4) Attached.
First i ran audio.cloverALC-120_v1.0b0.command again (y,y, port 1). Then I ran coedecdetec (attached) and tried patching the ssdt as it shows I have a problem. But that didn't do anything (I just paste it into patched, correct? Nothing else needs to be done?) HD audio is enabled in Bios.
5) attached
6)yes
7) no
8) not sure what to do here
9) Attached (sys info showing ID 2 even though I had selected 1 using audio.cloverALC-120_v1.0b0.command)
10) n/a
11) n/a

 

[toleda]

it should be "csr-active-config

My mistake, it is the only property where the boot flag is different than IOReg reports.
Add config.plist/RtVariables/BooterConfig/0x28 as noted in the guide
Restart
Run cloverALVC
Restart
Reply with new files