No Audio Devices - Realtek ALC AppleHDA [Guide]

[toleda]

see attached file

Config.pdf, not helpful; config.plist only.
MultiBeast file, corrupt
Boot log shows no audio installed.
Run MultiBeast, take screen shot.
Restart, attach all requested files in native format.

 

[toleda]

screwed up Clover

config.plist is not useful. Restore previous working config.plist and attach new files.

 

[robertswe]

Config.pdf, not helpful; config.plist only.
MultiBeast file, corrupt
Boot log shows no audio installed.
Run MultiBeast, take screen shot.
Restart, attach all requested files in native format.

Toledo, I never could get multicast to load the Realtek ALC1150, so I ran this program I found that is attached and now I have audio devices and sound. Thanks for all your help!

 

[toleda]

Here is the link

Remove the link, obsolete and unsupported.
For current scripts, see Post #1, Realtek ALC AppleHDA

 

[jmain]

1. No Audio Devices (No Codec)

2. 10.11.5 / Gigabyte z170n Gaming 5 / Bios F3 / Corei5 6600 / Integrated Graphics 530

3. Tried Multibeast, Realtek ALC AppleHDA Clover ALC and realtekALC

4. File Attached

5.File Attached

6.File Attached

7.File Attached

8. Screen Shots attached

9. N/A

10. N/A

11.1 File Attached

11.2 Don’t see an option in DPCIManager for Boot Log

 

[toleda]

Tried Multibeast, Realtek ALC AppleHDA Clover ALC and realtekALC

Mistake: Realtek ALC AppleHDA/Post #1/
Realtek ALC Installation Methods
See Step 4.
Start over with Step 1.

 

[jmain]

Mistake: Realtek ALC AppleHDA/Post #1/
Realtek ALC Installation Methods
See Step 4.
Start over with Step 1.

Do you mean Uninstall Realtek ALC AppleHDA?

 

[jmain]

Do you mean remove all the patches to config.plist restore the Applehda.kext and resubmit the files?
Or then choose one of the other methods?

 

[jmain]

When I remove all the patches that Multibeast added and restore AppleHDA.kext I get the following:

File: audio_codecdetect.command_v1.6


No audio codec detected

Verify BIOS, hardware, etc.

 

[jmain]

Woohoo I got it working.
What I did was after I removed everything I tried each of the Realtek ALC AppleHDA Scripts each of which failed with the same message. No IOReg/HDEF; BIOS/audio/disabled
So I looked that error up and installed a patch SSDT-HDEF-HDAS-1.aml. Rebooted then ran audio_cloverALC-110_v1.0r10.command rebooted again and it works.