- Joined
- Dec 23, 2017
- Messages
- 62
- Motherboard
- Asus Sabertooth Z97 Mark II
- CPU
- i7-4790K
- Graphics
- RX 580
- Mac
- Mobile Phone
I had another thread that I was discussing the problem with someone else and for some reason its been deleted.
Maybe because it was for high Sierra and not Mojave. Wish it had not been deleted as now I have to try and remember what I have done.
Heres the story. I had a Asus Maximus Hero VII running pretty darn stable on Mojave 10.14.2
Then the Hero VII just up and died. So I had to buy a refurb MOBO and I changed to Asus sabertooth Z97 mark II because
of it also being acceptable for Hackintosh and with a lower failure rate .
Everything went find after the BIOS changes and it booted up and ran the current install of Mojave that was on the EVO 500 when the Hero VII died.
That was shocking to say the least. And its working just fine with no issues other than it won't shut down. It drops the video output then does a restart like you had pushed the reset button. In order to get it to shutoff, I have to turn the power switch off on the PS.
So via searching on how to fix this problem I have done the following.
I went into my config.plist with clover configurator and ticked " fixshutdown" under DSDT
that did nothing for the problem
so I continued to search and saw the slide=0 thing being a resolution.
I then added the slide=0 to the boot options in BOOT and that also did nothing to resolve the issue .
Then I followed this thread to the letter - https://www.tonymacx86.com/threads/solved-shutdown-reboot.267582/
[SOLVED]
1. enabling slide=0 field (boot) in Clover Configurator
2. removing AptioMemoryFix-64.efi from /EFI/CLOVER/drivers64UEFI folder
3. adding EmuVariableUefi-64.efi and OsxAptioFix2Drv-free2000.efi into /EFI/CLOVER/drivers64UEFI folder
4. restart system
This also has not resolved the issue.
Im a NEWB and am no Hackintosh wizard.
Can anyone steer me in a direction to resolve the issue.
I can do a fresh install but id rather not since everything is working fine aside from this shutdown issue.
This is what im working with
Mojave 10.14.2
Mac Pro ( Mid 2012 ) - Could this be an issue ? It was the only way I could get preview working.
Asus Sabertooth Z97 Mark II motherboard
I7-4790K Haswell Processor
RX-580 GPU
I will attach my config.plist ( not that I know how to manipulate it correctly because I certainly do not )
Thanks in advance for any help.....
Maybe because it was for high Sierra and not Mojave. Wish it had not been deleted as now I have to try and remember what I have done.
Heres the story. I had a Asus Maximus Hero VII running pretty darn stable on Mojave 10.14.2
Then the Hero VII just up and died. So I had to buy a refurb MOBO and I changed to Asus sabertooth Z97 mark II because
of it also being acceptable for Hackintosh and with a lower failure rate .
Everything went find after the BIOS changes and it booted up and ran the current install of Mojave that was on the EVO 500 when the Hero VII died.
That was shocking to say the least. And its working just fine with no issues other than it won't shut down. It drops the video output then does a restart like you had pushed the reset button. In order to get it to shutoff, I have to turn the power switch off on the PS.
So via searching on how to fix this problem I have done the following.
I went into my config.plist with clover configurator and ticked " fixshutdown" under DSDT
that did nothing for the problem
so I continued to search and saw the slide=0 thing being a resolution.
I then added the slide=0 to the boot options in BOOT and that also did nothing to resolve the issue .
Then I followed this thread to the letter - https://www.tonymacx86.com/threads/solved-shutdown-reboot.267582/
[SOLVED]
1. enabling slide=0 field (boot) in Clover Configurator
2. removing AptioMemoryFix-64.efi from /EFI/CLOVER/drivers64UEFI folder
3. adding EmuVariableUefi-64.efi and OsxAptioFix2Drv-free2000.efi into /EFI/CLOVER/drivers64UEFI folder
4. restart system
This also has not resolved the issue.
Im a NEWB and am no Hackintosh wizard.
Can anyone steer me in a direction to resolve the issue.
I can do a fresh install but id rather not since everything is working fine aside from this shutdown issue.
This is what im working with
Mojave 10.14.2
Mac Pro ( Mid 2012 ) - Could this be an issue ? It was the only way I could get preview working.
Asus Sabertooth Z97 Mark II motherboard
I7-4790K Haswell Processor
RX-580 GPU
I will attach my config.plist ( not that I know how to manipulate it correctly because I certainly do not )
Thanks in advance for any help.....