- Joined
- Oct 13, 2017
- Messages
- 13
- Motherboard
- Gigabyte Z170 ultra gaming
- CPU
- Intel core i7-7700k
- Graphics
- EVGA GeForce GTX 1050
- Mac
- Mobile Phone
i am keep getting the stop symbol when tying to install in to my hackintosh.
I went here to install the OSX using a macbook pro in to a 32gb flash drive i used this link https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.200564/
i have also did all of this aswell
1. To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
2. Load Optimized Defaults
3. If your CPU supports VT-d, disable it
4. If your system has CFG-Lock, disable it
5. If your system has Secure Boot Mode, disable it
6. Set OS Type to Other OS
7. If your system has IO SerialPort, disable it
8. Set XHCI Handoff to Enabled
9. If you have a 6 series or x58 system with AWARD BIOS, disable USB 3.0
10. Save and exit.
This is my spec i have
Gigabyte Z270-HD3
i7-7700 lga 1151
evga 500w power supply
EVGA SuperSC 16GB 2 x 8GB DDR4-3200 PC4-25600 CL16 Dual Channel
960 GB SSD
Corsair Hydro Series High Performance Liquid CPU Cooler H60
I went here to install the OSX using a macbook pro in to a 32gb flash drive i used this link https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.200564/
i have also did all of this aswell
1. To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
2. Load Optimized Defaults
3. If your CPU supports VT-d, disable it
4. If your system has CFG-Lock, disable it
5. If your system has Secure Boot Mode, disable it
6. Set OS Type to Other OS
7. If your system has IO SerialPort, disable it
8. Set XHCI Handoff to Enabled
9. If you have a 6 series or x58 system with AWARD BIOS, disable USB 3.0
10. Save and exit.
This is my spec i have
Gigabyte Z270-HD3
i7-7700 lga 1151
evga 500w power supply
EVGA SuperSC 16GB 2 x 8GB DDR4-3200 PC4-25600 CL16 Dual Channel
960 GB SSD
Corsair Hydro Series High Performance Liquid CPU Cooler H60