- Joined
- Apr 9, 2015
- Messages
- 47
- Motherboard
- ASUS Prime Z490-P
- CPU
- i9-10900K
- Graphics
- RX 580
- Mac
- Classic Mac
- Mobile Phone
Hy, i buy the
motherboard msi Z170A tomahawk ac
processor intel 6700k
video card Gigabyte GTX 960 windforce oc
RAM 24GB 2400Mhz.
First i make this steps
2. Load Optimized Defaults
3. If your CPU supports VT-d, disable it
4. If your system has CFG-Lock, disable it
5. If your system has Secure Boot Mode, disable it
6. Set OS Type to Other OS
7. If your system has IO SerialPort, disable it
8. Set XHCI Handoff to Enabled
Then i install with unibeast sierra 10.12, after the instalation i use multebeast to install the drivers and the boot.
Everything works good but i have 3 problems.
1. The ALC892 don´t work
2. After the web drive nvidia instalation everytime start with osx driver not with nvidia web driver(i use the efimount 3 to mount the partition then in clover i change this code.
<key>SystemParameters</key>
<dict>
<key>InjectKexts</key>
<string>YES</string>
<key>InjectSystemID</key>
<true/>
<key>NvidiaWeb</key>
<true/>
</dict>)
but start only with osx driver.
3. if i shotdown the computer and i start again everything start (only the nvidia drive osx don´t start) but if i restart the computer i have this bug.
after this image impossible to start the computer again. I see the clover boot with after 3 seconds start but again this image
appears again. impossible to boot the sistem, for good boot i have to shotdown the computer and on again and works again.
If somone help my with this i appreciate this. THx
motherboard msi Z170A tomahawk ac
processor intel 6700k
video card Gigabyte GTX 960 windforce oc
RAM 24GB 2400Mhz.
First i make this steps
2. Load Optimized Defaults
3. If your CPU supports VT-d, disable it
4. If your system has CFG-Lock, disable it
5. If your system has Secure Boot Mode, disable it
6. Set OS Type to Other OS
7. If your system has IO SerialPort, disable it
8. Set XHCI Handoff to Enabled
Then i install with unibeast sierra 10.12, after the instalation i use multebeast to install the drivers and the boot.
Everything works good but i have 3 problems.
1. The ALC892 don´t work
2. After the web drive nvidia instalation everytime start with osx driver not with nvidia web driver(i use the efimount 3 to mount the partition then in clover i change this code.
<key>SystemParameters</key>
<dict>
<key>InjectKexts</key>
<string>YES</string>
<key>InjectSystemID</key>
<true/>
<key>NvidiaWeb</key>
<true/>
</dict>)
but start only with osx driver.
3. if i shotdown the computer and i start again everything start (only the nvidia drive osx don´t start) but if i restart the computer i have this bug.
after this image impossible to start the computer again. I see the clover boot with after 3 seconds start but again this image
appears again. impossible to boot the sistem, for good boot i have to shotdown the computer and on again and works again.
If somone help my with this i appreciate this. THx