- Joined
- May 24, 2017
- Messages
- 34
- Motherboard
- Z370 Titanium > Need manufactor & Full model # > See Rules!
- CPU
- Ryzen > Need model # > See Rules!
- Graphics
- GTX 1080 Ti
Hey, I have just started my first g5 (first time modding anything) and want to share everything as i go, It's going to be a long process as i'm not exactly sure about a Few details, Questions or advice is always welcome.
Parts!
-Power Mac G5 (Obviously)
-Laser Hive Full ATX Kit with PSU mount
-Laser Hive Front Panel Kit with 4x USB 3
-ASUS ROG Strix GeForce GTX 1080 Ti
-EK CoolStream PE 240 dual radiator
-Corsair SP120 Quiet Edition X3
-primoChill 1/2" Rigid RevolverSX Series Fittings
- Am4 ryz 1700x
-msi x370 titanium mobo
-EK XRES 140 Revo D5 PWM Pump/Reservoir Combo
-EK Supremacy EVO cpu block
-EK-FC1080 GTX Ti Nickel backplate
-EK-FC1080 GTX Ti Strix waaterblock
-EK AF Angled 2x45 Degree G1/4 Black Nickel
-High Density Weave Grey Silver Cable Sleeve from Moddiy
Current Progress!
-Installed Back Panel
-Installed Front panel
-Installed motherboard Tray
-Made a fan cover for the back not sure if ill end up using it)
-Top tray cut and reinstalled
-Radiator bracket cut, Finished and painted
-Made mount for pump/res
My Ideas!?!
I'm planning on using polished copper pipe for my cooling loop.
I want to make my Hdd Rack out of the G5 Cpu cooler cover plate.
Im going to give the top tray a more brushed finish to match the case
Pics ((sorry for the wall of pictures)don't mind the mess )
I was originally going to have this next part cut for me but i wasnt happy with the prices i was getting so i did it myself for 1/15th the cost and im happy with the outcome, i just need to have the mounting point bent
Im hoping these will give a little more support to the rad bracket
The rad need a little more support so i made a bracket to hold the other side to stop the wobble then cleaned them up for painting
Bit more painting, im really happy with how they came up.
Have been really busy and havent done much but here is a test fit picture
Parts!
-Power Mac G5 (Obviously)
-Laser Hive Full ATX Kit with PSU mount
-Laser Hive Front Panel Kit with 4x USB 3
-ASUS ROG Strix GeForce GTX 1080 Ti
-EK CoolStream PE 240 dual radiator
-Corsair SP120 Quiet Edition X3
-primoChill 1/2" Rigid RevolverSX Series Fittings
- Am4 ryz 1700x
-msi x370 titanium mobo
-EK XRES 140 Revo D5 PWM Pump/Reservoir Combo
-EK Supremacy EVO cpu block
-EK-FC1080 GTX Ti Nickel backplate
-EK-FC1080 GTX Ti Strix waaterblock
-EK AF Angled 2x45 Degree G1/4 Black Nickel
-High Density Weave Grey Silver Cable Sleeve from Moddiy
Current Progress!
-Installed Back Panel
-Installed Front panel
-Installed motherboard Tray
-Made a fan cover for the back not sure if ill end up using it)
-Top tray cut and reinstalled
-Radiator bracket cut, Finished and painted
-Made mount for pump/res
My Ideas!?!
I'm planning on using polished copper pipe for my cooling loop.
I want to make my Hdd Rack out of the G5 Cpu cooler cover plate.
Im going to give the top tray a more brushed finish to match the case
Pics ((sorry for the wall of pictures)don't mind the mess )
I was originally going to have this next part cut for me but i wasnt happy with the prices i was getting so i did it myself for 1/15th the cost and im happy with the outcome, i just need to have the mounting point bent
Im hoping these will give a little more support to the rad bracket
The rad need a little more support so i made a bracket to hold the other side to stop the wobble then cleaned them up for painting
Bit more painting, im really happy with how they came up.
Have been really busy and havent done much but here is a test fit picture
Last edited: