Contribute
Register

MultiBeast 6.0 "The installation failed" after installing Mavericks

Status
Not open for further replies.
dddanny123

dddanny123

Joined
May 28, 2012
Messages
9
Motherboard
Gigabyte GA-Z68XP-UD3
CPU
Intel Core i7-2600K 3,40 GHZ
Graphics
Palit GEFORCE GTX560
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
Just to add a bit of background, the initial install was quite a hassle since my monitor was always turning off after the spinning apple logo. I finally managed to get to the installer by adding "GraphicsMode=1920x1200x32" to the below string:

GraphicsEnabler=Yes GraphicsMode=1920x1200x32 PCIRootUID=1 -v

- After installing Mavericks (clean install) I opened MultiBeast 6.0 to install the bootloader and the kexts for GraphicsEnabler=Yes, 1080pDisplay Mode and PCI Root ID fix.
- The installation failed (even when selecting only one item)
- I checked System/Library/extensions for the SuperIOFamily.kext since it was advised on this thread (http://www.tonymacx86.com/multibeas...multibeast-fails-after-mavericks-install.html) to delete it, but I could not find it.
- I also updated the security settings to allow any apps to be opened, still no luck

Any help would be appreciated

Thanks!


MultiBeast.log

Code: 
10/27/13 20:03:05 - Starting MultiBeast 6.0-20131022
10/27/13 20:03:19 - Installing 'Customize > Boot Options > GraphicsEnabler=Yes'
10/27/13 20:03:19 - Install of '/Users/daniel/Desktop/MultiBeast-6.0.0/MultiBeast.app/Contents/Resources/GE-Yes-Chameleon' failed. Exiting.

install.log

Code: 
Oct 27 17:53:42 daniels-mac-pro installer[604]: -[IFPKGDerivedDocument sortedPackageLocations]: result = (
	    "file://localhost"
	)
Oct 27 17:53:42 daniels-mac-pro installer[604]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Oct 27 17:53:42 daniels-mac-pro installer[604]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Users/daniel/Desktop/MultiBeast-6.0.0/MultiBeast.app/Contents/Resources/Chimera-v2.2.1.pkg
Oct 27 17:53:42 daniels-mac-pro installer[604]: Set authorization level to root for session
Oct 27 17:53:42 daniels-mac-pro runner[605]: Administrator authorization granted.
Oct 27 17:53:42 daniels-mac-pro installer[604]: Will use PK session
Oct 27 17:53:42 daniels-mac-pro installer[604]: Starting installation:
Oct 27 17:53:42 daniels-mac-pro installer[604]: Configuring volume "Mavericks"
Oct 27 17:53:42 daniels-mac-pro installer[604]: Preparing disk for local booted install.
Oct 27 17:53:42 daniels-mac-pro installer[604]: Free space on "Mavericks": 117,71 GB (117713612800 bytes).
Oct 27 17:53:42 daniels-mac-pro installer[604]: Create temporary directory "/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T//Install.604VlMZaO"
Oct 27 17:53:42 daniels-mac-pro installer[604]: IFPKInstallElement (1 packages)
Oct 27 17:53:42 daniels-mac-pro installer[604]: Using authorization level of root for IFPKInstallElement
Oct 27 17:53:42 daniels-mac-pro installd[606]: installd: Starting
Oct 27 17:53:42 daniels-mac-pro installd[606]: installd: uid=0, euid=0
Oct 27 17:53:42 daniels-mac-pro installd[606]: PackageKit: Adding client PKInstallDaemonClient pid=604, uid=0 (/usr/sbin/installer)
Oct 27 17:53:42 daniels-mac-pro installer[604]: PackageKit: Enqueuing install with boosting
Oct 27 17:53:42 daniels-mac-pro installd[606]: PackageKit: ----- Begin install -----
Oct 27 17:53:42 daniels-mac-pro installd[606]: PackageKit: request=PKInstallRequest <1 packages, destination=/>
Oct 27 17:53:42 daniels-mac-pro installd[606]: PackageKit: packages=(
	    "PKLeopardPackage <file://localhost/Users/daniel/Desktop/MultiBeast-6.0.0/MultiBeast.app/Contents/Resources/Chimera-v2.2.1.pkg>"
	)
Oct 27 17:53:42 daniels-mac-pro installd[606]: PackageKit: Extracting file://localhost/Users/daniel/Desktop/MultiBeast-6.0.0/MultiBeast.app/Contents/Resources/Chimera-v2.2.1.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/4A087FE5-0F37-410F-A31B-ACF064FDAF1C.activeSandbox/Root, uid=0)
Oct 27 17:53:42 daniels-mac-pro installd[606]: PackageKit: prevent user idle system sleep
Oct 27 17:53:42 daniels-mac-pro installd[606]: PackageKit: suspending backupd
Oct 27 17:53:42 daniels-mac-pro installd[606]: PackageKit: Using trashcan path /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/PKInstallSandboxTrash/4A087FE5-0F37-410F-A31B-ACF064FDAF1C.sandboxTrash for sandbox /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/4A087FE5-0F37-410F-A31B-ACF064FDAF1C.activeSandbox
Oct 27 17:53:42 daniels-mac-pro installd[606]: PackageKit: Shoving /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/4A087FE5-0F37-410F-A31B-ACF064FDAF1C.activeSandbox/Root (2 items) to /
Oct 27 17:53:42 daniels-mac-pro install_monitor[607]: Temporarily excluding: /Applications, /Library, /System, /bin, /private, /sbin, /usr
Oct 27 17:53:42 daniels-mac-pro installd[606]: PackageKit: Executing script "./postinstall" in /private/tmp/PKInstallSandbox.CoHlNA/Scripts/com.tonymacx86.Chimerav-2.2.0.pkg.99bUYI
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Volume is /
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ===============================================================
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Installer Variables:
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ***************************************************************
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: bootvolume: Volume is /
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: bootdev: Volume device is /dev/disk1s2
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: bootrdev: Volume raw device is /dev/rdisk1s2
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: bootslice: Volume slice is 2
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: bootdisk: Disk device is /dev/disk1
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: bootrdisk: Disk raw device is /dev/rdisk1
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: diskloader: Disk loader is boot0
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: diskloaderdualboot: Disk loader is boot0md
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: partitionloader: Partition loader is boot1h
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: filesystemloader: Filesystem loader is boot
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ---------------------------------------------------------------
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ===============================================================
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Determine Partition Scheme:
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ***************************************************************
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Found System ID 'EE' to identify GPT Partition
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Found System ID '00' for each remaining possible partition
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: GPT found.
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ---------------------------------------------------------------
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ===============================================================
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Find Disk Signature:
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ***************************************************************
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: 00000000
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Just Zero's found meaning Windows isn't installed.
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ---------------------------------------------------------------
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ===============================================================
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Diskmicrocodetype:
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ***************************************************************
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Didn't find a match for GRUB
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Didn't find a match for LILO
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ---------------------------------------------------------------
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ===============================================================
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Diskmicrocode:
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ***************************************************************
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Diskmicrocode = 874 (Which means the first 437 bytes of the MBR Disk Sector is blank)
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: No disk microcode found. Updating.
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: diskupdate is now set to true.
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ---------------------------------------------------------------
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ===============================================================
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Find Partition Bootcode:
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ***************************************************************
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: partitionbootcode = 1024 (Which means the whole 512 bytes of the MBR Disk Sector is blank)
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: No partition bootcode found. Updating.
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ---------------------------------------------------------------
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ===============================================================
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Can we install the Chameleon bootloader files?
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ***************************************************************
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Diskupdate = true, so yes
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Executing command: //usr/sbin/fdisk440 -u -f //usr/standalone/i386/boot0 -y /dev/disk1
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Executing command: dd if=//usr/standalone/i386/boot1h of=/dev/rdisk1s2
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: 2+0 records in
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: 2+0 records out
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: 1024 bytes transferred in 0.000285 secs (3591110 bytes/sec)
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Executing command: cp -p //usr/standalone/i386/boot /
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Executing command: //usr/bin/chflags hidden //boot
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ---------------------------------------------------------------
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ===============================================================
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Set Active Partition ONLY if Windows is not installed
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ***************************************************************
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Current Active Partition: 
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: / is not flagged as active, so let's do it.
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Enter 'help' for information
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: fdisk: 1> Disk: /dev/rdisk1	geometry: 15566/255/63 [250069680 sectors]
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: Offset: 0	Signature: 0xAA55
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall:          Starting       Ending
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall:  #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: ------------------------------------------------------------------------
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall:  1: EE 1023 254  63 - 1023 254  63 [         1 -  250069679] GPT         
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall:  2: 00    0   0   0 -    0   0   0 [         0 -          0] unused      
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall:  3: 00    0   0   0 -    0   0   0 [         0 -          0] unused      
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall:  4: 00    0   0   0 -    0   0   0 [         0 -          0] unused      
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: fdisk: 1> Partition 2 marked active.
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: fdisk:*1> Device could not be accessed exclusively.
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: A reboot will be needed for changes to take effect. OK? [n] Writing MBR at offset 0.
Oct 27 17:53:42 daniels-mac-pro installd[606]: ./postinstall: fdisk: 1> ---------------------------------------------------------------
Oct 27 17:53:42 daniels-mac-pro installd[606]: PackageKit: Writing receipt for com.tonymacx86.Chimerav-2.2.0.pkg to /private/var/db/receipts
Oct 27 17:53:42 daniels-mac-pro installd[606]: Installed "Chimera-v2.2.1" ()
Oct 27 17:53:42 daniels-mac-pro install_monitor[607]: Re-included: /Applications, /Library, /System, /bin, /private, /sbin, /usr
Oct 27 17:53:43 daniels-mac-pro installd[606]: PackageKit: releasing backupd
Oct 27 17:53:43 daniels-mac-pro installd[606]: PackageKit: allow user idle system sleep
Oct 27 17:53:43 daniels-mac-pro installd[606]: PackageKit: ----- End install -----
Oct 27 17:53:43 daniels-mac-pro installd[606]: PackageKit: 1.0s elapsed install time
Oct 27 17:53:43 daniels-mac-pro installd[606]: PackageKit: Running idle tasks
Oct 27 17:53:43 daniels-mac-pro installd[606]: PackageKit: Removing client PKInstallDaemonClient pid=604, uid=0 (/usr/sbin/installer)
Oct 27 17:53:43 daniels-mac-pro installd[606]: PackageKit: Done with sandbox removals
Oct 27 17:53:43 daniels-mac-pro installer[604]: Removing temporary directory "/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T//Install.604VlMZaO"
Oct 27 17:53:43 daniels-mac-pro installer[604]: Finalize disk "Mavericks"
Oct 27 17:53:43 daniels-mac-pro installer[604]: Notifying system of updated components
Oct 27 17:53:43 daniels-mac-pro installer[604]: **** Summary Information ****
Oct 27 17:53:43 daniels-mac-pro installer[604]:   Operation      Elapsed time
Oct 27 17:53:43 daniels-mac-pro installer[604]: -----------------------------
Oct 27 17:53:43 daniels-mac-pro installer[604]:        zero      0.00 seconds
Oct 27 17:53:43 daniels-mac-pro installer[604]:        disk      0.02 seconds
Oct 27 17:53:43 daniels-mac-pro installer[604]:     install      1.03 seconds
Oct 27 17:53:43 daniels-mac-pro installer[604]:     -total-      1.05 seconds
 
Ok, I've added the log content.
 
These logs make no sense as the MultiBeast.log is for a GraphicsEnabler=Yes failing and the install.log shows a successful installation of Chimera.
 
OctoTUF
TUF Z390-PRO GAMING |  i9 9900K |  Vega 64 8GB
KabyLake
GA-Z270X-Ultra Gaming |  i7 7700K |  HD 630
Kaby-Test
ROG STRIX Z270I GAMING |  i7 7700K |  HD 630
Hmm strange. This was the only text with "MultiBeast" I could find in the install.log, are there any clues of what the problem might be?

When I select Chimera plus GraphicsEnabler=Yes, the installer seems to install Chimera fine (the installer bar actually makes progress), but as soon as it starts installing GraphicsEnabler=Yes it jumps directly to "The installation failed". It almost feels as though there's some kind of write protection on the S/L/E folder. Does anyone know of an alternative/manual method of installing the kext's?
 
ok, I tried a clean install and it still does not work. In fact, "MultiBeast" does not even show up in the install.log since the installation fails before anything can be logged. As a test I tried choosing the USB drive as install location instead of the SSD, and the installer worked. I'm thinking this really has something to do with write permissions.. any help would be super appreciated!
Thanks!
 
Yes, I tried the "repair disk permissions" found in the Disk Utility, and also the "Repair permissions + rebuild cache" with the Kext Wizard but none of these methods worked.
 
Just to add to this, I've been having the same issue with Multibeast, and the exact same GE-Installation failed in the logs.

Gigabyte GA-Z68X-UD3H-B3
Nvidia GeForce GTX560
i7-3770k

I can successfully boot Mavericks using the Unibeast USB, however once I go to install everything in Multibeast, I come up with the same issue. The interesting thing is, it does install the boot loader, but I have no idea how completely. If I try to boot with the one Multibeast "installs," it stops booting around

[IOBluetoothHCIController]

It starts then it says something like

[IOBluetoothHCIController] - Bluetooth transport failed

after which it just stops booting and stays there forever. Not sure how much this is related, but I would love for this Multibeast issue to be fixed as more people than just me are having it that I know personally.

And as a side note, Multibeast does successfully install all my other kexts, and it will even install a Mac identifier if I try to select one in the multi beast configuration like "MacPro 5,5" or something.
 
Having the same problem. If I install the bootloader, my computer just hangs at the Apple loading screen with the spinning wheel. I can boot from the USB stick no problem. I require the PCIRootUID=0 and GraphicsEnabler=Yes flags.

Also getting the same results with MultiBeast. Installation failed.

11/06/13 19:02:20 - Installing 'Bootloaders > Chimera v2.2.1'
11/06/13 19:02:36 - Installing 'Customize > Themes > Chameleon 2.2 Default'
11/06/13 19:02:41 - Installing 'Customize > Boot Options > GraphicsEnabler=Yes'
11/06/13 19:02:41 - Install of '/Users/me/Desktop/MultiBeast-6.0.0/MultiBeast.app/Contents/Resources/GE-Yes-Chameleon' failed. Exiting.

-

That's all that's in the log. I am currently on a z68xp-ud3 Gigabyte board.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top