- Joined
- Oct 25, 2012
- Messages
- 5
- Motherboard
- Mac
- CPU
- 3610QM i7 @ 2.3GHZ
- Graphics
- Intel hd4000 & GTX680M
- Mac
- Classic Mac
- Mobile Phone
Hi I installed Mountain Lion on my MSI GT-60 0ne 220us.
The full specs are here:
I booted up instalation with:
-v -x GraphicsEnabler=No npci=x3000
Installed OK and run Multibeast to install Chimera 1.11 (With supposed QE & CI support for my intel hd4000).
Modified org.chameleon.Boot.plist to add:
GraphicsEnabler= No and Graphics mode 1920x1080x32.
I dont know how to get Intel HD 4000 working here is a youtube video of a guy that gets it working: http://www.youtube.com/watch?v=1TMQTvjL_j0
It refers to a post (http://www.tonymacx86.com/mountain-lion-desktop-support/61216-10-8-how-enable-hd4000.html) of this page that talks about but I cannot get it working.
When I boot up I think it was not loading the intel hd 4000 kext because the log shows this:
Sime tips please? Im Stuck.
The full specs are here:
Model Modifications: | Screen |
CPU/Processor: | Intel i7-3610QM 2.30 Ghz (x 8 threads) | 3.30 GHz (x 4 Threads) | 6 MB L3 Cache | 45 Watts |
Graphics Card: | Intel HD4000 & NVIDIA GeForce GTX 680M Graphics with 4GB GDDR5 |
RAM/Memory: | 12GB (3 x 4GB) 1600MHz DDR3 |
Hard Drive: | 750GB 7200rpm SATA HDD |
Display: | 15.6" Full HD (16:9) Glossy LCD Display (1920x1080) |
Wireless: | Intel Centrino 2230 Built-in 802.11b/g/n WLAN Card, Killer Gaming Network 1202 |
I booted up instalation with:
-v -x GraphicsEnabler=No npci=x3000
Installed OK and run Multibeast to install Chimera 1.11 (With supposed QE & CI support for my intel hd4000).
Modified org.chameleon.Boot.plist to add:
GraphicsEnabler= No and Graphics mode 1920x1080x32.
I dont know how to get Intel HD 4000 working here is a youtube video of a guy that gets it working: http://www.youtube.com/watch?v=1TMQTvjL_j0
It refers to a post (http://www.tonymacx86.com/mountain-lion-desktop-support/61216-10-8-how-enable-hd4000.html) of this page that talks about but I cannot get it working.
When I boot up I think it was not loading the intel hd 4000 kext because the log shows this:
Code:
Nov 4 05:53:11 localhost kernel[0]: [ PCI configuration begin ]Nov 4 05:53:11 localhost kernel[0]: console relocated to 0xfa0000000
Nov 4 05:53:11 localhost kernel[0]: PCI configuration changed (bridge=3 device=2 cardbus=0)
Nov 4 05:53:11 localhost kernel[0]: [ PCI configuration end, bridges 5 devices 15 ]
Nov 4 05:53:11 localhost kernel[0]: Kext com.apple.driver.AppleSMCPDRC - library kext com.apple.driver.IOPlatformPluginFamily not found.
Nov 4 05:53:11 localhost kernel[0]: Can't load kext com.apple.driver.AppleSMCPDRC - failed to resolve library dependencies.
Nov 4 05:53:11 localhost kernel[0]: Kext com.apple.driver.AppleSMCPDRC failed to load (0xdc00800e).
Nov 4 05:53:11 localhost kernel[0]: Failed to load kext com.apple.driver.AppleSMCPDRC (error 0xdc00800e).
Nov 4 05:53:11 localhost kernel[0]: Kext com.apple.driver.AppleIntelHD4000Graphics - library kext com.apple.iokit.IOGraphicsFamily not found.Couldn't alloc class "AppleSMCPDRC"
Nov 4 05:52:34 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Nov 4 05:53:11 localhost kernel[0]: Can't load kext com.apple.driver.AppleIntelHD4000Graphics - failed to resolve library dependencies.
Nov 4 05:53:11 localhost kernel[0]: Kext com.apple.driver.AppleIntelHD4000Graphics failed to load (0xdc00800e).
Nov 4 05:53:11 localhost kernel[0]: Failed to load kext com.apple.driver.AppleIntelHD4000Graphics (error 0xdc00800e).
Nov 4 05:53:11 localhost kernel[0]: Couldn't alloc class "Gen7Accelerator"
Nov 4 05:53:11 localhost kernel[0]: Kext com.apple.driver.AppleHDAController - library kext com.apple.iokit.IOGraphicsFamily not found.
Nov 4 05:52:34 localhost com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***
Nov 4 05:53:11 localhost kernel[0]: Can't load kext com.apple.driver.AppleHDAController - failed to resolve library dependencies.
Nov 4 05:52:34 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
Sime tips please? Im Stuck.