- Joined
- Oct 11, 2012
- Messages
- 118
- Motherboard
- Gigabyte H97M-D3H
- CPU
- i5-4750
- Graphics
- HD 4600
- Mobile Phone
Hi
Need some help. I am trying to install Monterey on my Office rig, which is currently running Big Sur. It's a Haswell build on a Gigabyte H81-S2PV with core i3 4350 CPU & 8 GB RAM. Installed a WD SATA 120 GB SSD. Wanted to install Monterey on the SSD. Made & ocvalidated a USB installer with Monterey with OC 0.83. The installer runs and loads ok. But when it comes to selecting the HDD or SSD to install Monetrey neither the HDD (where the Big Sur is installed) nor the SSD is shown. Can anyone guess what may be causing this? Had the SSD formatted in JHFS+ already. But no luck. However, at home, on a GA-H97M-D3H rig with a core i5 4560 CPU, both the HDD & SSD are being displayed.
Any help is appreciated.
Need some help. I am trying to install Monterey on my Office rig, which is currently running Big Sur. It's a Haswell build on a Gigabyte H81-S2PV with core i3 4350 CPU & 8 GB RAM. Installed a WD SATA 120 GB SSD. Wanted to install Monterey on the SSD. Made & ocvalidated a USB installer with Monterey with OC 0.83. The installer runs and loads ok. But when it comes to selecting the HDD or SSD to install Monetrey neither the HDD (where the Big Sur is installed) nor the SSD is shown. Can anyone guess what may be causing this? Had the SSD formatted in JHFS+ already. But no luck. However, at home, on a GA-H97M-D3H rig with a core i5 4560 CPU, both the HDD & SSD are being displayed.
Any help is appreciated.