Mini PC AMD Ryzen 7 5700U - Need Installation Help

[craighazan]

What is noticeable is that after booting up and logging in, the WiFi signal is displayed for almost 1 second and then the WiFi is back with an exclamation mark.

Have you thought about installing Ventura?, I've been on it for the past week and I haven't experienced any issues. I even downloaded iMovie and started putting together the next episode of Hack Desk on a GenMachine 5700U, Sonoma couldn't do that.

 

[Funnyland]

I have exactly the same WiFi problem in Ventura

 

[craighazan]

I have exactly the same WiFi problem in Ventura

Did you plug the Antenna from the Wi-Fi/BT the correct way round?, It's quite possible they're pugged in the wrong port.

 

[Funnyland]

Card checked. Cable tested and checked for accuracy.

It runs great under Windows and Linux.

The card also works under Mac OS with the EFI from Post 160.

 

[Funnyland]

Have you thought about installing Ventura?, I've been on it for the past week and I haven't experienced any issues. I even downloaded iMovie and started putting together the next episode of Hack Desk on a GenMachine 5700U, Sonoma couldn't do that.

I tested Imovie and it works too

 

[Funnyland]

Have you thought about installing Ventura?, I've been on it for the past week and I haven't experienced any issues. I even downloaded iMovie and started putting together the next episode of Hack Desk on a GenMachine 5700U, Sonoma couldn't do that.

A lot of things are going on and I still have questions about other things.

Brave startup problems are easy to fix
To do this, 3 lines at the top right - Settings - at the top right (press the magnifying glass) and enter "Graphics" in the search line. Then deactivate graphics acceleration there. Brave restart and it works.

Mistake:

Spear screen only works for one (Horizon Sonoma only)
Screen brightness cannot be adjusted.
If the display goes into sleep mode, it will restart for no reason.
Every now and then short-term probes to open 2 Aps (1 to 2 seconds)
I have the feeling that USB is slow. It's also strange that some USB sticks are ejected quickly and others only eject immediately.

I put it under startup disk on Mac and restart the computer from Windows for whatever reason. Can only be influenced manually.
The BIOS is also set to boot from the Mac. But even then only Windows.

Do you have an idea?

 

[Feartech]

A lot of things are going on and I still have questions about other things.

Brave startup problems are easy to fix
To do this, 3 lines at the top right - Settings - at the top right (press the magnifying glass) and enter "Graphics" in the search line. Then deactivate graphics acceleration there. Brave restart and it works.

Mistake:

Spear screen only works for one (Horizon Sonoma only)
Screen brightness cannot be adjusted.
If the display goes into sleep mode, it will restart for no reason.
Every now and then short-term probes to open 2 Aps (1 to 2 seconds)
I have the feeling that USB is slow. It's also strange that some USB sticks are ejected quickly and others only eject immediately.

I put it under startup disk on Mac and restart the computer from Windows for whatever reason. Can only be influenced manually.
The BIOS is also set to boot from the Mac. But even then only Windows.

Do you have an idea?

try brightness keys kext

 

[Funnyland]

I inserted the kext and entered the boot argument as it says on the kext page.

It still says you should change "_Qxx to XQxx".

But where can I find that???

Typically no DSDT patches are required. Please remove old _Qxx to XQxx ones.

 

[Feartech]

I inserted the kext and entered the boot argument as it says on the kext page.

It still says you should change "_Qxx to XQxx".

But where can I find that???

Typically no DSDT patches are required. Please remove old _Qxx to XQxx ones.

yes, you have patches with _Qxx to XQxx in your config.plist, then remove them

 

[Funnyland]

Hmmm didn't help either