Contribute
Register

MacOS Sierra Asus X556U

Status
Not open for further replies.

Attachments

  • IMG_20170602_132734.jpg
    IMG_20170602_132734.jpg
    4.5 MB · Views: 195
  • CLOVER.zip
    4.3 MB · Views: 126
you kext folder should only have 1 folder inside it called other, delete the rest

also for some reason you have HWMonitor.app in there? remove it

also remove the "Sensors" kexts from there

you may want to pick 1 network kext that is suitable for your hardware and remove the rest

also VoodooPS2Daemon needs to be deleted from there as well

your folder drivers64UEFI is not per guide, remove the ones that are not needed (from the clover guide there is an image of what files only need to be in there

your config.plist is not from the guide, did you use unibeast? you must follow the clover guide and choose a config.plist that matches your hardware
 
ok, thanks.
I remove all the folder inside "KEXTS" except folder "Other".
I remove folder "HWMonitor.app" inside folder "Other".
I remove all the "xxxxxSensor.kext" inside folder "Other".
I remove "VoodooPS2Daemon".

Can you help me for "you may want to pick 1 network kext that is suitable for your hardware"? Where I can find the network kext available? How I chose the best?


About the files in "drivers64UEFI" i download the HFSPlus.efi from:
https://github.com/JrCs/CloverGrowerPro/raw/master/Files/HFSPlus/X64/HFSPlus.efi
I also remove all files except:
FSInject-64.efi
OsxAptioFix2Drv-64.efi
OsxFatBinaryDrv-64.efi
HFSPlus.efi


About file "config.plist". Yes, I used Unibeast 7.1.1
My notebook have Intel HD520 so I need "config_HD520_530_540.plist" downloadable from
https://github.com/RehabMan/OS-X-Clover-Laptop-Config

Right?
 
Giovas91 said:
ok, thanks.
I remove all the folder inside "KEXTS" except folder "Other".
I remove folder "HWMonitor.app" inside folder "Other".
I remove all the "xxxxxSensor.kext" inside folder "Other".
I remove "VoodooPS2Daemon".

Can you help me for "you may want to pick 1 network kext that is suitable for your hardware"? Where I can find the network kext available? How I chose the best?


About the files in "drivers64UEFI" i download the HFSPlus.efi from:
https://github.com/JrCs/CloverGrowerPro/raw/master/Files/HFSPlus/X64/HFSPlus.efi
I also remove all files except:
FSInject-64.efi
OsxAptioFix2Drv-64.efi
OsxFatBinaryDrv-64.efi
HFSPlus.efi


About file "config.plist". Yes, I used Unibeast 7.1.1
My notebook have Intel HD520 so I need "config_HD520_530_540.plist" downloadable from
https://github.com/RehabMan/OS-X-Clover-Laptop-Config

Right?
Click to expand...

OsxAptioFix2Drv-64.efi should be replaced with OsxAptioFixDrv-64.efi


yes on the config.plist, (don't forget to rename it to config.plist)

you can probably worry about your network after installation if you are not sure what network card you have
 
Giovas91 said:
ok, I reed the reedme files and copi the folders "xxxxxx.kext" downloaded from bitbucket on folder "Other"
For "RehabMan-Voodoo-2017-0527" there are two sub-folders "Debug" and "Release". I copy "VoodooPS2Controller.kext" inside "Release" folder.

I tried to boot but I have the same error...
Click to expand...

From your panic image, I can see you didn't follow the guide (your config.plist is not from the guide).
 
Good...
I replace OsxAptioFix2Drv-64.efi with OsxAptioFixDrv-64.efi downloaded from:
https://github.com/danieleds/Asus-U...FI/CLOVER/drivers64UEFI/OsxAptioFixDrv-64.efi

Which config.plist I need to replace with config.plist for HD520 downloaded? There are different config.plist in EFI folder.
I need to replaceconfig.plist in EFI\CLOVER?

I know that I could have problems with network card, I have "Realtek RTL8723BE"

About network kext, where I can find a suitable kext for my hardware?
 

Attachments

  • Cattura.PNG
    Cattura.PNG
    8.9 KB · Views: 205
Giovas91 said:
Good...
I replace OsxAptioFix2Drv-64.efi with OsxAptioFixDrv-64.efi downloaded from:
https://github.com/danieleds/Asus-U...FI/CLOVER/drivers64UEFI/OsxAptioFixDrv-64.efi

Which config.plist I need to replace with config.plist for HD520 downloaded? There are different config.plist in EFI folder.
I need to replaceconfig.plist in EFI\CLOVER?

I know that I could have problems with network card, I have "Realtek RTL8723BE"

About network kext, where I can find a suitable kext for my hardware?
Click to expand...
use config_HD520_530_540.plist and rename it to config.plist, then overwrite the one in your clover folder
 
Ok, perfect, the installer was started and complete loading.... but I have a problem :banghead::banghead::banghead:
My touchpad and keyboard doesn't work after I choose language (Italian), maybe I need to choose English? It seems strange....
I also noticed that the regards (welcome, benvenuto, ....) are not very smooth. I think that it's normal on hackintosh boot phase...
 
Giovas91 said:
Good...
I replace OsxAptioFix2Drv-64.efi with OsxAptioFixDrv-64.efi downloaded from:
https://github.com/danieleds/Asus-U...FI/CLOVER/drivers64UEFI/OsxAptioFixDrv-64.efi

Which config.plist I need to replace with config.plist for HD520 downloaded? There are different config.plist in EFI folder.
I need to replaceconfig.plist in EFI\CLOVER?

I know that I could have problems with network card, I have "Realtek RTL8723BE"

About network kext, where I can find a suitable kext for my hardware?
Click to expand...

Use OsxAptioFix from the Clover installer, not something random...
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top