Contribute
Register

MacOS Sierra Asus X556U

Status
Not open for further replies.
Giovas91

Giovas91

Joined
Oct 5, 2012
Messages
20
Motherboard
Asus X556UJ
CPU
Intel Core i5-6200U
Graphics
HD Graphics 520 - nVidia GeForce 920M
Mobile Phone
  1. Android
Hi, I try to install MacOS Sierra on my notebook (Asus X556U).
I found some discussion about this system but the images attached to the posts was deleted and I can't understand if the problem I have was already be solved.
I created the USB boot using MacBook Pro and guidelines, after I set it up the BIOS properly.

After I selecting the correct boot support with Clover my installation procedure stopping....

Can someone help me?

Thanks!!!!!!
Notebook specs: CPU Intel i5-6200U - 8Gb RAM (4+4Gb) - nVidia Gt920M - SSD Samsung 850 Evo
 

Attachments

  • IMG_20170530_231933.jpg
    IMG_20170530_231933.jpg
    3.6 MB · Views: 641
Giovas91 said:
Hi, I try to install MacOS Sierra on my notebook (Asus X556U).
I found some discussion about this system but the images attached to the posts was deleted and I can't understand if the problem I have was already be solved.
I created the USB boot using MacBook Pro and guidelines, after I set it up the BIOS properly.

After I selecting the correct boot support with Clover my installation procedure stopping....

Can someone help me?

Thanks!!!!!!
Notebook specs: CPU Intel i5-6200U - 8Gb RAM (4+4Gb) - nVidia Gt920M - SSD Samsung 850 Evo
Click to expand...

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"
 
Giovas91 said:
I downloaded FakeSMC.kext and VoodooPS2Controller.kext. what specific files i need to copy in folder "Other"? I also move the folder "10.6", "10.7", "10.8", ....... in folder "Other".
Click to expand...

Copy the kexts. Your question regarding the version specific directories under kexts is covered in the guide.
You should not be moving those folders under Other.
 
RehabMan said:
Copy the kexts. Your question regarding the version specific directories under kexts is covered in the guide.
You should not be moving those folders under Other.
Click to expand...

ok, sorry...
I restore the folders "10.6", "10.7", .... and copy the folder "OS-X-FakeSMC-kozlek-master" and "OS-X-Voodoo-PS2-Controller-master" on folder "Other".

Where I need to find the next steps? :D
 
Giovas91 said:
ok, sorry...
I restore the folders "10.6", "10.7", .... and copy the folder "OS-X-FakeSMC-kozlek-master" and "OS-X-Voodoo-PS2-Controller-master" on folder "Other".

Where I need to find the next steps? :D
Click to expand...

You clearly downloaded the wrong thing. Make sure you read the README at each link to find actual downloads.
 
RehabMan said:
You clearly downloaded the wrong thing. Make sure you read the README at each link to find actual downloads.
Click to expand...
:banghead::banghead::banghead::banghead:

Sorry but i can't understand...
I need to copy folder "FakeSMC" and rename it in "FakeSMC.kext" on folder "Other"?
For "OS-X-Voodoo-PS2-Controller-master" I think that i need to copy only folder "VoodooPS2Controller" and rename it in "VoodooPS2Controller.kext".
Right?:crazy:

I tried and finally my boot seems to start, but don't loading nothing after 7/8 minutes....
 

Attachments

  • IMG_20170601_233316.jpg
    IMG_20170601_233316.jpg
    4.3 MB · Views: 423
Last edited:
Giovas91 said:
:banghead::banghead::banghead::banghead:

Sorry but i can't understand...
I need to copy folder "FakeSMC" and rename it in "FakeSMC.kext" on folder "Other"?
For "OS-X-Voodoo-PS2-Controller-master" I think that i need to copy only folder "VoodooPS2Controller" and rename it in "VoodooPS2Controller.kext".
Right?:crazy:

I tried and finally my boot seems to start, but don't loading nothing after 7/8 minutes....
Click to expand...

You are not reading carefully.
At each link on github, there is README. It contains the location of downloads, which happen to be on bitbucket (currently).
Clearly, you're not reading the README.
 
RehabMan said:
You are not reading carefully.
At each link on github, there is README. It contains the location of downloads, which happen to be on bitbucket (currently).
Clearly, you're not reading the README.
Click to expand...

ok, I reed the reedme files and copi the folders "xxxxxx.kext" downloaded from bitbucket on folder "Other"
For "RehabMan-Voodoo-2017-0527" there are two sub-folders "Debug" and "Release". I copy "VoodooPS2Controller.kext" inside "Release" folder.

I tried to boot but I have the same error...
 

Attachments

  • IMG_20170602_122001.jpg
    IMG_20170602_122001.jpg
    5.2 MB · Views: 433
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top