macOS 10.15.2 Update

[kat101]

Updated clover to 5100, updated Lilu, wEG and appleALC, then applied from Appstore.

Both Raven 1 and 2 had to be highly supervised or it wouldn't boot from the install drive. The 10.15.2 solved an issue I had with the IGPU not completely loading and would get stuck on the Apple loading screen.

Raven 1: 10.15.0 to 10.15.2
Raven 2: 10.15.1 to 10.15.2

 

[inequals]

All good here, although installation took awhile longer than I'm used to. Maybe my NVME drive is getting old? (Or running TRIM in hardware and using APFS is really the wrong thing to do...) Anyhow, I didn't run any benchmarks but I swear the graphics in the desktop are smoother (RX 460). But then, I really had the impression that 10.15.1 had some minor issue with it. Checked that H264 and HEVC acceleration was still working after reading some of the earlier posts, and they are.

Overall I'm pleased with the update, if for no other reason than Apple kindly re-implementing the ability to control the Music.app via iOS Remote.app. Tsk, to think I used to think this company could do no wrong...

 

[Alexandro]

Smooth update here as well. During the second restart the screen went black for 15 minutes. After a while the system rebooted and the update was successful. Clover and Lilu have not been updated prior the update.

 

[qaywsx]

Smooth as always ... my 5700XT and E5-2690V2 are working perfectly under 10.15.2.

 

[gonzolak]

Everything went very smooth here. Updated : Lilu, WEG, AppleALC. Didn't touch Clover, there's no need. No problem with HEVC (RX 580 4GB), didn't have to use another kext for that.

 

[vbaksys]

macOS Catalina 10.15.2
CPU i8700k
Motherboard Maximus X Hero
64GB DDR4
Graphics Radeon VII 16GB
SMBIOS iMacPro1,1 or iMac18,3 same issue

After a successful fresh new install, working on computer my OS freezes randomly, need to hard restart
any ideas? I believe it’s related GPU because sometimes before freeze it gives me glitchy rainbow wheel

 

[TheBal]

Updated without issues

 

[thanhliem]

If you have the issue (my 10.15.2 now makes the system drive read only ...)
(unable to erase EFI-Backups folder for example, I also was unable to install the latest tonysmac clover)

The solution i found in terminal is

sudo mount -uw /

it works until you restart.

How it work on 10.15.1

My system drive read only.

 

[oreoapple]

Direct update from 10.14.6 to 10.15.2: update lilu,AppleALC,whateverGreen. with clover r4920.
I also have RX 560 DP/HDMI issue: my DP doesn't work, I don't use HDMI; follow @@Chandler2 's method
modify config.plist to add InjectATI solves the issue.
Sound issue is fixed by: https://www.tonymacx86.com/threads/catalina-easy-update-and-sound-fix.284752/
For some reason, I have to run the commands twice.

 

[anantaramdas]

Updated like a charm. Clover 5100 latest Kext. No disk selection. No issues