- Joined
- Apr 1, 2017
- Messages
- 47
- CPU
- Intel Core i7-6700
- Graphics
- NVIDIA GTX 960m
Writing here to help others.
I have a Skylake laptop with Intel HD 530 graphics card and a 4k display.
I was having issues at boot when I upgraded from v10.12.4 to v10.12.5, even with Lily and IntelGraphicsFixup kexts installed.
After a while I found the solution. I describe it here.
After these steps are done, you should have everything working again, with max vram available in v10.12.5
Note: Bear in mind that Clover does not save the change of FakeID, so if you reboot again without doing step 4, you must change the FakeID again for the system not to hang at boot.
PS: Admins and moderators. I feel like this info should be added to post #6, so anyone with a 4k display could benefit from it.
I have a Skylake laptop with Intel HD 530 graphics card and a 4k display.
I was having issues at boot when I upgraded from v10.12.4 to v10.12.5, even with Lily and IntelGraphicsFixup kexts installed.
After a while I found the solution. I describe it here.
- In Clover Options, leave IntelInject checked
- Below the IntelInject option, change the FakeID to an invalid one (I used 0x12345678)
- At this point you should be able to boot but with vram extremely low (32mb), to increase it, follow the next steps.
- IOKit (pixel clock patch) was working with v10.12.4. For v10.12.5 you must use CoreDisplay. Follow the instructions here: https://github.com/Floris497/mac-pixel-clock-patch-V2
- Reboot
After these steps are done, you should have everything working again, with max vram available in v10.12.5
Note: Bear in mind that Clover does not save the change of FakeID, so if you reboot again without doing step 4, you must change the FakeID again for the system not to hang at boot.
PS: Admins and moderators. I feel like this info should be added to post #6, so anyone with a 4k display could benefit from it.