Discussion in 'OS X Updates' started by tonymacx86, May 15, 2017.
Writing here to help others.
I have a Skylake laptop with Intel HD 530 graphics card and a 4k display.
I was having issues at boot when I upgraded from v10.12.4 to v10.12.5, even with Lily and IntelGraphicsFixup kexts installed.
After a while I found the solution. I describe it here.
In Clover Options, leave IntelInject checked
Below the IntelInject option, change the FakeID to an invalid one (I used 0x12345678)
At this point you should be able to boot but with vram extremely low (32mb), to increase it, follow the next steps.
IOKit (pixel clock patch) was working with v10.12.4. For v10.12.5 you must use CoreDisplay. Follow the instructions here: https://github.com/Floris497/mac-pixel-clock-patch-V2
After these steps are done, you should have everything working again, with max vram available in v10.12.5
Note: Bear in mind that Clover does not save the change of FakeID, so if you reboot again without doing step 4, you must change the FakeID again for the system not to hang at boot.
PS: Admins and moderators. I feel like this info should be added to post #6, so anyone with a 4k display could benefit from it.
Finally upgraded yesterday. Install kexts, update clover and updated like a champ! Thanks a lot guys.
Updating to 10.12.5 causes my system to get stuck in a bootloop.
I tried the following steps:
- Update to OSX 10.12.5
- Disable Inject Intel in order to boot
- Installed Kexts in library/extensions using KextBeast
- Updated HackrNVMeFamily for my m2 drive to 10.12.5
At this stage my system gets stucked into the same bootloop you talked about. When I manually remove the kexts from recovery mode terminal the system is able to boot again (with Intel Rejected), but ofcourse misses the two kexts to have the graphics working properly.
I read through this thread, but couldn't find a solution posted. A few people including tjxddt describe similar problems.
Did anyone have a similar problem and managed to solve it?
Successful update: I only had to install nvidia drivers 10.12.5.
My NVMe Samsung 960 EVO work without having to do anything.
Hello, i just updated my device without installing the Intel kext first :/
Now after the apple logo i get a funny black screen and it just does nothing. My clover is on auto load so i cant get to the options to un-tick thr Intel in the menu.
Any suggestions? I have all my work on there and in panicking.
[Solved] Kernel Panic after installing lilu.kext and intelgraphicsfixuip.kext for 10.12.5
Please update your profile (personal details) with your Motherboard or Make/Model, CPU and Graphics Card.
Try to hold any key when powering on to invoke the bootloader GUI.
10.12.6 is out and will break your nVidia WebDriver, after upgrade the graphics will stuck at 4MB, so don't update yet if you have a 1050/1060 Pascal
Yep, that's why I write the Post #2 for each update. You can't believe how many people read Post #1 only, and then wonder why they have problems. (An olde coaches' saying, "Don't rush to fail!")
Separate names with a comma.