Contribute
Register

macOS 10.12.5 Update

Status
Not open for further replies.
ASUS X99 DELUXE/U3.1 and Intel 5820k > https://www.tonymacx86.com/threads/...s-x99-deluxe-u3-1.204503/page-11#post-1518381 <
So, here is the my current efi folder for my ASUS X99 DELUXE U 3.1 mobo, with Intel 5820K OC at 4.5 ghz on MacOS 10.12.5 ! I've included the latest Clover Configurator in the archive, is the best thing i've used in hackintoshing with clover.
If you don't have the same hardware like me, I recommend to try files from this efi folder (kext's, ssdt's, driveres...etc) on an external clover usb to not mess your efi on hdd/ssd.
The most important thing, have fun with this :D

Note: ssdt.aml is for my OC cpu at 4.5 ghz. If you have the same OC, you can use it without a worry.

Note2: I've changed my smbios to imac14.2 for native CPUPM (haswell)



 
Intel HD patch worked for me (4670K/HD4600 on a Z87N-WiFi). I had to create a fresh 10.12.5 install drive with Unibeast, Lilu.kext and IntelGraphicsFixup.kext. Booted my system drive from that, installed Lilu.kext and IntelGraphicsFixup.kext in /Library/Extensions using KextBeast and updated Clover. Problem solved.
 
Update to 10.12.5 ended with no graphic in my hd 530 mini itx H170 core 6100. Unfortunatelly common advise in this thread made things worse as after lilu.kext and Intelgraphisfixup.kexts inject by kext beast I got KP in a loop.
Could reach desktop only with fake id in safe mode. So I removed this two kexts, and can boot only with fke grphic id.Additionally my hd530 grphic was slow and glitchy showing only 8mb vram insted 1536. No possible to play video by VLC or use Siri.
Than I tried to reinstall back 10.12.4 as clean install wiping my SSD and making new USB with latest Clover 4077.
After install it seemed to work fine with right monitor resolution and 1536mb vram. But after reboot all came back to the start point. Boot went dark in the middle and could reach desktop only with fake graphic id, no mention 8 mb vram. Now I am totally lost and have no idea what am I to do , to get my hackintoch back. As this is my first custom build I am not experienced with hardware issues so any advice will be much appreciated.
 
Updated to 10.12.5 (ASUS P7P55D-E Pro, i7, EVGA GeForce GT 440 1024 MB) and all works excluded the audio. Bought an USB device for audio and after installation now audio is perfect. I have two screens (clean cache to have two displays) I will try for three. Anyway all is working (remember don't waste time in loading the driver for audio).
 
Last edited:
  • Performed the Intel HD 5xx/6xx Graphics fix with KextBeast beforehand.
  • Updated with the 10.12.5 Combo update.
  • Rebooted.
Everything's good. No issue with Intel 530 graphics. SSD TRIM support still enabled. Seemed easy-peasy.
 
Did the update, went well one the first boot. Had to install the new NVIDIA drivers then the Cuda drivers, then the DVI port started acting funny. Tried a reboot and the system would brick at loading the graphics drivers.

Had to do recovery to timemachine image before the update. Now working well.
 
in my Hackintosh 10.12.4 there is no vol control , its stuck on max, is that fixed in 10.12.5 ? anyone similar config can confirm?>
 
Today Apple released 10.12.5, the fifth major update to macOS Sierra. Update any supported system using the built-in Software Update functionality through the Mac App Store, or by using the standalone installer available from Apple.com.​


Be sure to back up any important data, and if possible clone your hard drive before applying the update. If you have any issues post-update, boot using UniBeast created USB, press spacebar, and boot using Safe Mode.

What we know about 10.12.5 so far...
  • macOS Build 16F73
  • Kernel updated to Darwin 16.6.0
  • Updated Intel, NVIDIA, and AMD graphics drivers
  • This update will replace your audio drivers. If you enabled Realtek onboard audio using MultiBeast or the cloverALC script, no changes will be necessary.
  • Install macOS Sierra App has been updated - If you downloaded macOS Sierra from the App Store prior to today, and you want to have the latest version on your backup installer USB, simply log into the Mac App Store and click Download. The updated 10.12.5 Install macOS Sierra App can be found in the Applications folder. You may then re-create your UniBeast installation USB.
Testing is now underway- this post will be updated. Good luck, and let us know how it goes! Report your results here.



Related:
https://www.tonymacx86.com/threads/macos-10-12-4-update.217169/
https://www.tonymacx86.com/threads/macos-10-12-3-update.212177/
https://www.tonymacx86.com/threads/macos-10-12-2-update.209122/
https://www.tonymacx86.com/threads/macos-10-12-1-update.205565/
macOS Sierra is Now Available on the Mac App Store
https://www.tonymacx86.com/threads/os-x-10-11-6-update.195102/
https://www.tonymacx86.com/threads/os-x-10-11-5-update.193170/
https://www.tonymacx86.com/threads/os-x-10-11-4-update.187001/
https://www.tonymacx86.com/os-x-updates/183129-os-x-10-11-3-update.html
https://www.tonymacx86.com/os-x-updates/177647-os-x-10-11-2-update.html
https://www.tonymacx86.com/os-x-updates/173245-os-x-10-11-1-update.html
https://www.tonymacx86.com/apple-news-rumors/173244-os-x-el-capitan-now-available-mac-app-store.html

I gave up my hackintosh attempt :(
Motherboard asus z170i pro gaming
i7 6700
integrated graphics
16gb ram 2400mhz crucial, all parts from suggested in here and compatible,
i had a successful 10 installs everything great, all files fine pc ran smooth, but as soon as i restart, i was unable to get back in... i tried for 3 days straight... no help
i gave up... till next time bye
 
Status
Not open for further replies.
Back
Top