macOS 10.12.1 Update

[movingincirc]

I tried updating to 10.12.1, but installation got stuck for 4 hours and I decided to reboot. now it's kernel panicking on boot. anyone know how to repair the installation?

 

[Andrea123456]

Updated my Asus Z87 Deluxe with i7 4770K. Everything ok instead of sound, i used MultiBeast and everything is working. Thank you very much.

 

[gurucc]

Hi All,

I Upgraded yesterday and after fixing the wifi issues as mentioned on Page 15, everything seemed to be working properly until this morning when I started getting 'Disk not ejected properly' messages on a regular basis for all of my USB connected disks (4x external drives) - help!
I have a Gigabyte g1. Sniper M5:
http://www.gigabyte.com/products/product-page.aspx?pid=4482#ov

And am not really sure where to start troubleshooting! - any help will be greatly appreciated.

 

[fannar182]

I got everything working in 10.12.1.. Thunderbolt, Wifi, Graphic card but the one thing that isn't working are the USB 3 ports at the back. Could you guys help me solving that problem so I can connect my external drives where I store all of my work projects?

 

[Stork]

I got everything working in 10.12.1.. Thunderbolt, Wifi, Graphic card but the one thing that isn't working are the USB 3 ports at the back. Could you guys help me solving that problem so I can connect my external drives where I store all of my work projects?

Since we're not telepathic, we need to know your system components. See the tonymacx86 Forum Rules & Policies on signature block components.

Additionally, please provide complete details in your Profile.

Mobo: motherboard manufacturer/model
CPU: detailed CPU model (e.g., i7-4770K)
Graphics: Video card manufacturer/model and/or Intel Integrated Graphics version (e.g., HD4600)

See my Profile items to the left of my post, under my name.

By completing your Profile and signature block, you help us help you better.

 

[fannar182]

@Stork Sorry.. I've updated my profile. Do you know what could be causing the USB 3 at the back (6 ports) not to work? The USB (2 ports) at the front work perfectly. I had my USB 3 ports work fine yesterday but then I installed NVIDIA Web Drivers and did a BIOS change, changed the .plist and things inside Clover Configurator. For example I changed my profile from iMac 17 (USB 3 port worked but not the graphic card) to iMac 14,2 (Graphic card works but not the USB 3). ?

 

[Stork]

@Stork Sorry.. I've updated my profile. Do you know what could be causing the USB 3 at the back (6 ports) not to work? The USB (2 ports) at the front work perfectly. I had my USB 3 ports work fine yesterday but then I installed NVIDIA Web Drivers and did a BIOS change, changed the .plist and things inside Clover Configurator. For example I changed my profile from iMac 17 (USB 3 port worked but not the graphic card) to iMac 14,2 (Graphic card works but not the USB 3). ?

I recommend you open a thread in the Sierra Desktop Support forum section, detailing your problem. TIA.

 

[simin63]

Am I behind the times ?
Something new, I get the Clover Apple logo and now the real Mac one right after it.
Is that normal now ????

I installed Sierra 10.12.1, with no issues.
I'm running it on a Samsung SM951 128GB M.2 NVME ( MZVPV128HDGM-00000 ).
I only had to reinstall AppleHDA.kext, HDAEnabler1.kext, and IONVMeFamily.kext.

Thansk Guys.

Hello mactition
I have the almost same hardwares: asus-m ws, hd7950,etc. But except for cpu:xeon 2630 v3. When I builded 10.12.2 according your post, stuck at PCI Configuration Begin. Today, I have a new Intel 6-Core i7-5820K, can you give me how to set up bios.

[FONT=Verdana, Helvetica, Arial, sans-serif]Myrgards,
[/FONT]

 

[mactition]

Hello mactition
I have the almost same hardwares: asus-m ws, hd7950,etc. But except for cpu:xeon 2630 v3. When I builded 10.12.2 according your post, stuck at PCI Configuration Begin. Today, I have a new Intel 6-Core i7-5820K, can you give me how to set up bios.

Notes . . .
This is about ASUS X99-M WS motherboard
I have everything working on this board,
All USB ports, 2.0, 3.0, and 3.1
WiFi,
Bluetooth,
Ethernet,
All Audio, including over DisplayPort and HDMI,
Main boot is Samsung SM951 M.2 NVMe (not AHCI type)

Sleep works with Radeon GPU, but does a reboot on wake.
Radeon sleep is an ongoing macOS issue that I don't think anyone has resolved.
I tried a GeForce card and it worked exactly the same as the Radeon.

I recommend using Clover Configurator, it's a lot easier to understand what is what.

There are a few things that make this board a challenge.
USB was very difficult, but much better as of Sierra 10.12.2
In Clover config the RT Variables must be the following,
BooterConfig = 0x28
CsrActiveConfig = 0x67

My files Attached Include . . .
EFI files for Clover Installation and Config, to install in EFI partition,
All Kext required, to install in System>Library>Extensions,
Screen shots of essential BIOS settings,
System Report screen shots to verfiy stuff working.

Read this post . . .
It covers basic information on installing macOS for this board.

About USB . . .
All USB ports register and work correctly, see the System Reports.

As of Sierra 10.12.2 kext to make USB work are not required,
USB has to be configured as shown in the BIOS screen shot,
And the DSDT in the EFI files is also required.

Without the DSDT you will have to set BIOS to allow it to control USB.
Otherwise you might not have any USB after booting to the OS.

 

[djoldman]

Well, got it fixed by switching to model identifier 14,2... good bye iMac12,2, i've tried everything i could.

macOS Sierra 10.12.1 up and running.

Comcody: It looks like you and I have basically the same build except that I have a GeForce GTX 550 Ti.

I'm running 10.12.3 Sierra.

Here are things I've tried:

• I have installed the nvidia web drivers, version: WebDriver-367.15.10.35f01.pkg, with boot option nvda_drv=1: this seems to partially work as the screen shows up but the background is black, there are some static looking blocks on the upper left of windows and generally the system is unstable.
• I have tried using "inject NVidia" from Clover Configurator and this does not work, I get nothing on the screen after Clover booting.

Questions:
1. The graphics card shows up in the "about this mac" as "EVGA GeForce GTX 550 Ti 3072 MB" I believe my card only has 2MB though: could this be the problem?

2. Any ideas as to how to get this to work?

I don't think there are any kexts in /Library/Extensions Here are the kexts in /System/Library/Extensions that I believe are for nVidia:

drwxr-xr-x    3 root  wheel    102 Mar  4 09:39 GeForce.kext
drwxr-xr-x    3 root  wheel    102 Mar  4 09:39 GeForceAIRPlugin.bundle
drwxr-xr-x    3 root  wheel    102 Jan 24 13:39 GeForceAIRPluginWeb.bundle
drwxr-xr-x    3 root  wheel    102 Mar  4 09:39 GeForceGA.plugin
drwxr-xr-x    3 root  wheel    102 Mar  4 09:39 GeForceGLDriver.bundle
drwxr-xr-x    3 root  wheel    102 Jan 24 13:40 GeForceGLDriverWeb.bundle
drwxr-xr-x    3 root  wheel    102 Mar  4 09:39 GeForceMTLDriver.bundle
drwxr-xr-x    3 root  wheel    102 Jan 24 13:50 GeForceMTLDriverWeb.bundle
drwxr-xr-x    3 root  wheel    102 Mar  4 09:39 GeForceTesla.kext
drwxr-xr-x    3 root  wheel    102 Jan 24 13:39 GeForceTeslaGAWeb.plugin
drwxr-xr-x    3 root  wheel    102 Mar  4 09:39 GeForceTeslaGLDriver.bundle
drwxr-xr-x    3 root  wheel    102 Jan 24 13:39 GeForceTeslaGLDriverWeb.bundle
drwxr-xr-x    3 root  wheel    102 Mar  4 09:39 GeForceTeslaVADriver.bundle
drwxr-xr-x    3 root  wheel    102 Jan 24 13:39 GeForceTeslaVADriverWeb.bundle
drwxr-xr-x    3 root  wheel    102 Jan 24 13:39 GeForceTeslaWeb.kext
drwxr-xr-x    3 root  wheel    102 Mar  4 09:39 GeForceVADriver.bundle
drwxr-xr-x    3 root  wheel    102 Jan 24 13:48 GeForceVADriverWeb.bundle
drwxr-xr-x    3 root  wheel    102 Jan 24 13:48 GeForceWeb.kext
drwxr-xr-x    3 root  wheel    102 Mar  4 09:39 NVDAGF100Hal.kext
drwxr-xr-x    3 root  wheel    102 Jan 24 13:21 NVDAGF100HalWeb.kext
drwxr-xr-x    3 root  wheel    102 Mar  4 09:39 NVDAGK100Hal.kext
drwxr-xr-x    3 root  wheel    102 Jan 24 13:21 NVDAGK100HalWeb.kext
drwxr-xr-x    3 root  wheel    102 Jan 24 13:21 NVDAGM100HalWeb.kext
drwxr-xr-x    3 root  wheel    102 Mar  4 09:39 NVDANV50HalTesla.kext
drwxr-xr-x    3 root  wheel    102 Jan 24 13:13 NVDANV50HalTeslaWeb.kext
drwxr-xr-x    3 root  wheel    102 Mar  4 09:40 NVDAResman.kext
drwxr-xr-x    3 root  wheel    102 Mar  4 09:40 NVDAResmanTesla.kext
drwxr-xr-x    3 root  wheel    102 Jan 24 13:13 NVDAResmanTeslaWeb.kext
drwxr-xr-x    3 root  wheel    102 Jan 24 13:21 NVDAResmanWeb.kext
drwxr-xr-x    3 root  wheel    102 Mar  4 09:40 NVDAStartup.kext
drwxr-xr-x    3 root  wheel    102 Jan 24 13:21 NVDAStartupWeb.kext