- Joined
- Oct 19, 2015
- Messages
- 23
- Motherboard
- Asus Z97-a
- CPU
- i7-4790K
- Graphics
- GTX 970
- Classic Mac
- Mobile Phone
Hi,
I did have a thread regarding this machine and the (antique) gpu (x3100) but that part is resolved already. This time, i'm trying to get the USB fully working. Yes, i am very well aware that this particular computer is old (its running a T9300 cpu/8gb ram) but Sierra runs quite well on it, besides the annoying usb problems.
Problem
When Sierra starts (10.12.2) i only have a functional usb mouse. Since i also installed the VoodoPS2-controller from Rehabman, i also have got the touchpad and two buttons beneath the touchpad working. I also have a Realtek 8188cu (usb) wifi card that does not work, unless i remove it and plug it back in again, then it wakes up and i get wifi running also (have an intel wifi card inside that can't be used for obvious reasons).
When generating and disassembling my DSDT/various SSDT files (using Clover F4) and iasl, i get this that i believe relates to the usb ports:
Trying to follow Rehabman and others guides here, i then renamed the "EHC1" and "EHC0" to "EH01" and "EH02" respectively. After this, i have tried to follow the guide here, renaming the usb ports inside of the AppleUSBEHCIPCI.kext (
http://www.insanelymac.com/forum/topic/306777-guide-usb-fix-el-capitan-1011/) as well as trying to add the names EH01 and EH02 to the dummy kext described at the bottom of that page. Neither which worked.
When i look at my ioreg, i can see (also in DSDT) that i've got several USB things (USB0, USB1, USB2, USB3, USB4)
My question is basically: do i mix up the EH01/02 devices with what should really be inside the AppleUSBEHCIPCI.kext, namely the USB0 to USB4 devices?
I tried the USBInjectAll.kext (installed using kextwizard in S/L/E), removing and plugging back my Realtek wifi dongle in all ports, and what i can see then is that most of those USBx ports (in ioreg) become red and then gren.
How would i best go about this issue.
Machine:
Lenovo T61 (T9300), X3100, 8Gb ram, Clover 4012 (legacy boot).
I did have a thread regarding this machine and the (antique) gpu (x3100) but that part is resolved already. This time, i'm trying to get the USB fully working. Yes, i am very well aware that this particular computer is old (its running a T9300 cpu/8gb ram) but Sierra runs quite well on it, besides the annoying usb problems.
Problem
When Sierra starts (10.12.2) i only have a functional usb mouse. Since i also installed the VoodoPS2-controller from Rehabman, i also have got the touchpad and two buttons beneath the touchpad working. I also have a Realtek 8188cu (usb) wifi card that does not work, unless i remove it and plug it back in again, then it wakes up and i get wifi running also (have an intel wifi card inside that can't be used for obvious reasons).
When generating and disassembling my DSDT/various SSDT files (using Clover F4) and iasl, i get this that i believe relates to the usb ports:
Trying to follow Rehabman and others guides here, i then renamed the "EHC1" and "EHC0" to "EH01" and "EH02" respectively. After this, i have tried to follow the guide here, renaming the usb ports inside of the AppleUSBEHCIPCI.kext (
http://www.insanelymac.com/forum/topic/306777-guide-usb-fix-el-capitan-1011/) as well as trying to add the names EH01 and EH02 to the dummy kext described at the bottom of that page. Neither which worked.
When i look at my ioreg, i can see (also in DSDT) that i've got several USB things (USB0, USB1, USB2, USB3, USB4)
My question is basically: do i mix up the EH01/02 devices with what should really be inside the AppleUSBEHCIPCI.kext, namely the USB0 to USB4 devices?
I tried the USBInjectAll.kext (installed using kextwizard in S/L/E), removing and plugging back my Realtek wifi dongle in all ports, and what i can see then is that most of those USBx ports (in ioreg) become red and then gren.
How would i best go about this issue.
Machine:
Lenovo T61 (T9300), X3100, 8Gb ram, Clover 4012 (legacy boot).