Laptop Compatibility - Sager Np8278-s

[RehabMan]

all the sudden the internet worked and everything was fine except i couldn't log in to the app store it says that the device or computer isn't verified

You need working, built-in Ethernet at 'en0' to access the Mac App Store. Either install Ethernet drivers for your device (if available), or use NullEthernet: http://www.tonymacx86.com/network/122884-mac-app-store-access-nullethernet-kext.html

and i watched a video on youtube and the guy was using chameleon boot loader so i thought its the same thing so i just added the dict and the key and string inside in the beganing of the config.plist and i restarted and it loader the chrtistmas theme that means it couldn't use the config.plist so how can i access the EFI partition from windows now or ubuntu and remove the lines that i added to the config.plist ?

Always use a plist editor to edit config.plist.

Boot using your USB into OS X, then fix your config.plist.

 

[waleed111]

You need working, built-in Ethernet at 'en0' to access the Mac App Store. Either install Ethernet drivers for your device (if available), or use NullEthernet: http://www.tonymacx86.com/network/122884-mac-app-store-access-nullethernet-kext.html



Always use a plist editor to edit config.plist.

Boot using your USB into OS X, then fix your config.plist.

You told me before that its supported but i think the bigger problem now is knowing all of the boot args so can you give some boot args that I can put manually that will make it boot so I can bring back the working config.plist ? Because its backed up on the desktop

 

[RehabMan]

You told me before that its supported but i think the bigger problem now is knowing all of the boot args so can you give some boot args that I can put manually that will make it boot so I can bring back the working config.plist ? Because its backed up on the desktop

You should still be able to boot from your Clover USB (you're using a config.plist on the USB EFI that works).

 

[waleed111]

You should still be able to boot from your Clover USB (you're using a config.plist on the USB EFI that works).

I'm using the same hard drive for both the boot loader and EFI and clover EFI so how can i use the USB on ?

 

[RehabMan]

I'm using the same hard drive for both the boot loader and EFI and clover EFI so how can i use the USB on ?

I'm not sure what you mean. At the beginning, you should have created a Clover USB (stick) according to this guide: http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html

 

[waleed111]

I'm not sure what you mean. At the beginning, you should have created a Clover USB (stick) according to this guide: http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html

I did that on the same external hard drive

 

[RehabMan]

I did that on the same external hard drive

Boot Windows or Linux. Mount the EFI partition on your HDD. Fix it or replace with one from: https://github.com/RehabMan/OS-X-Clover-Laptop-Config

You should create a USB stick you can use for recovery situations.

 

[waleed111]

Boot Windows or Linux. Mount the EFI partition on your HDD. Fix it or replace with one from: https://github.com/RehabMan/OS-X-Clover-Laptop-Config

You should create a USB stick you can use for recovery situations.

I fixed it by using my friend MacBook Pro to remove the lines that I added to config.plist
Note: it says IMac (27-inch,Late 2013) in the about not sure why even though in the benchmark it says Macbook Pro (in config.plist the SMBIOS is Macbook pro) here is a benchmark link do you think its good ?
http://browser.primatelabs.com/geekbench3/1348532 and should change the score in my profile since its less ? (in windows its more)

It is supported: http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/

i installed the RTL8111 kext (release) using kext wizard and restarted and i still get the message in the app score how can i check if the kext worked and ethernet is working ?

 

[RehabMan]

I fixed it by using my friend MacBook Pro to remove the lines that I added to config.plist
Note: it says IMac (27-inch,Late 2013) in the about not sure why even though in the benchmark it says Macbook Pro (in config.plist the SMBIOS is Macbook pro) here is a benchmark link do you think its good ?
http://browser.primatelabs.com/geekbench3/1348532 and should change the score in my profile since its less ? (in windows its more)

You have likely damaged your config.plist such that it is being ignored.

Post your current config.plist.

i installed the RTL8111 kext (release) using kext wizard and restarted and i still get the message in the app score how can i check if the kext worked and ethernet is working ?

It needs to be at 'en0' and it must be built-in. Post ioreg and I'll look.

 

[waleed111]

You have likely damaged your config.plist such that it is being ignored.

Post your current config.plist.



It needs to be at 'en0' and it must be built-in. Post ioreg and I'll look.

i don't think i have damaged my config.plist but i'll post it anyways because you know better maybe something changed that i didn't notice and i'll attach my ioreg as well

Note: check why i only can use my headphones for outputting sound and i can't use my speakers and i think that ethernet is working because its added in network in SysPref but the apple store still doesn't work for some reason