Kernel panic Booting Sierra from flash drive on Lenovo Laptop

[Marshall2002]

I am trying to install sierra on my Lenovo ideapad 300 15 inch Core i3-6100U 4GB ram 500gb hard drive Intel HD Graphics 520 128mb ram. Whenever i boot from my flash drive that i have created (following this guide: https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.200564/) I get a kernel panic. While googling it i thought it was the graphics ram, but in windows it shows 128mb and what i found was it had to show more than 96mb, too that shouldn't be a problem. I have FakeSMC.kext, IntelGraphicsFixup.kext, Lilu.kext, VoodooPS2Controller.kext in the other folder plus an ethernet kext. I have also tried it following this guide: https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/ any help would be nice. I will upload picture.

 

[Feartech]

I am trying to install sierra on my Lenovo ideapad 300 15 inch Core i3-6100U 4GB ram 500gb hard drive Intel HD Graphics 520 128mb ram. Whenever i boot from my flash drive that i have created (following this guide: https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.200564/) I get a kernel panic. While googling it i thought it was the graphics ram, but in windows it shows 128mb and what i found was it had to show more than 96mb, too that shouldn't be a problem. I have FakeSMC.kext, IntelGraphicsFixup.kext, Lilu.kext, VoodooPS2Controller.kext in the other folder plus an ethernet kext. I have also tried it following this guide: https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/ any help would be nice. I will upload picture.

windows is not the best way to determine DVMT-prealloc

which is in the the FAQ:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

also follow the clover guide and update your hardware profile as per rules

 

[RehabMan]

I am trying to install sierra on my Lenovo ideapad 300 15 inch Core i3-6100U 4GB ram 500gb hard drive Intel HD Graphics 520 128mb ram. Whenever i boot from my flash drive that i have created (following this guide: https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.200564/) I get a kernel panic. While googling it i thought it was the graphics ram, but in windows it shows 128mb and what i found was it had to show more than 96mb, too that shouldn't be a problem. I have FakeSMC.kext, IntelGraphicsFixup.kext, Lilu.kext, VoodooPS2Controller.kext in the other folder plus an ethernet kext. I have also tried it following this guide: https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/ any help would be nice. I will upload picture.

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

 

[Marshall2002]

So i need to find 01030303 00002002 00005001 and change it to 01030303 00003001 00009000 in AppleIntelSKLGraphicsFramebuffer kext where do i find this kext?

 

[RehabMan]

So i need to find 01030303 00002002 00005001 and change it to 01030303 00003001 00009000 in AppleIntelSKLGraphicsFramebuffer kext where do i find this kext?

You can do it with Clover's KextsToPatch.

 

[Marshall2002]

Okay so using clover configurator I added it (see picture). I will then change it from config_HD520_etc to config.plist and place it on the efi portion of my flash drive, then will test it. Also thank you for your help I am sure it gets very frustrating dealing with noob's like me. I hope it works.

 

[Marshall2002]

Okay so i did as I said above, i used clover configurator to add the KextsToPatch, but i still get the cpu 0 kernel panic (see screen shot)

. I don't know what is wrong? I will attach the EFI from my flash drive as a zip, the config.plist i used the most recent time I got the kernel panic. What I did is I downloaded these configs https://github.com/RehabMan/OS-X-Clover-Laptop-Config and opened the config_HD_520 one (because i have HD 520 Graphics on my laptop) in clover configurator and added the necessary KextsToPatch using clover configugrator (see screen shot)

And then I renamed it config.plist and put it on the flash drive in place of the other one. To create the flash drive i followed this guide https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/ by RehabMan.
Can't figure out what i did wrong/what i forgot? Any help would be great?

I have two ram slots and only one 4gb stick is this a problem? it says that DIMM0 and DIMM1 are empty why?
107:270 0:000 === [ PatchSmbios ] =======================================
107:270 0:000 insert table 9 for dev 0:0
107:270 0:000 insert table 9 for dev 0:0
107:271 0:001 Trusting SMBIOS...
107:271 0:000 Channels: 1
107:271 0:000 Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
107:271 0:000 SMBIOS Type 17 Index = 0 => 0 0:
107:271 0:000 BANK 0 DIMM0 EMPTY
107:271 0:000 SMBIOS Type 17 Index = 1 => 1 1:
107:271 0:000 BANK 0 DIMM1 EMPTY
107:271 0:000 NumberOfMemoryDevices = 2
107:271 0:000 Table 131 is present, CPUType=10
107:271 0:000 Change to: 905

From EFI\CLOVER\misc\preboot.log

Thank You

 

[RehabMan]

Okay so i did as I said above, i used clover configurator to add the KextsToPatch, but i still get the cpu 0 kernel panic (see screen shot)

. I don't know what is wrong? I will attach the EFI from my flash drive as a zip, the config.plist i used the most recent time I got the kernel panic. What I did is I downloaded these configs https://github.com/RehabMan/OS-X-Clover-Laptop-Config and opened the config_HD_520 one (because i have HD 520 Graphics on my laptop) in clover configurator and added the necessary KextsToPatch using clover configugrator (see screen shot)

And then I renamed it config.plist and put it on the flash drive in place of the other one. To create the flash drive i followed this guide https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/ by RehabMan.
Can't figure out what i did wrong/what i forgot? Any help would be great?

I have two ram slots and only one 4gb stick is this a problem? it says that DIMM0 and DIMM1 are empty why?
107:270 0:000 === [ PatchSmbios ] =======================================
107:270 0:000 insert table 9 for dev 0:0
107:270 0:000 insert table 9 for dev 0:0
107:271 0:001 Trusting SMBIOS...
107:271 0:000 Channels: 1
107:271 0:000 Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
107:271 0:000 SMBIOS Type 17 Index = 0 => 0 0:
107:271 0:000 BANK 0 DIMM0 EMPTY
107:271 0:000 SMBIOS Type 17 Index = 1 => 1 1:
107:271 0:000 BANK 0 DIMM1 EMPTY
107:271 0:000 NumberOfMemoryDevices = 2
107:271 0:000 Table 131 is present, CPUType=10
107:271 0:000 Change to: 905

From EFI\CLOVER\misc\preboot.log

Thank You

Your problem appears to be a memory problem.
You need to fill out config.plist/SMBIOS/Memory such that it represents your physical memory configuration.
Because it is obvious from your preboot.log that no memory modules are detected/published in the SMBIOS info data:

0:100  0:000  Type 17 Index = 0
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 1
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Boot status=0
0:100  0:000  Running on: '80Q7' with board 'Paris 5A8'

It is not surprising the system crashes if it detects no memory installed.
You can get memory details from CPU-Z on Windows.
Read Clover documentation for details on config.plist/SMBIOS/Memory.

 

[Marshall2002]

Okay so the first kernel panic was caused by the ram, I put in the ram information and it now will start to boot I get the little bar and it loads for a while and when it's about two thirds of the way I get the following kernel panic.


Don't know what this one is except it seems to be with the gpu? If you could check the config.plist and see if I have any thing wrong that would be great.
Thank you

 

[RehabMan]

Okay so the first kernel panic was caused by the ram, I put in the ram information and it now will start to boot I get the little bar and it loads for a while and when it's about two thirds of the way I get the following kernel panic.

View attachment 271478
Don't know what this one is except it seems to be with the gpu? If you could check the config.plist and see if I have any thing wrong that would be great.
Thank you

Read guide regarding DVMT-prealloc:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/