- Joined
- May 15, 2011
- Messages
- 233
- Motherboard
- ASrock z370 Fatal1ty Gaming mini-ITX/ac
- CPU
- i7 8700K
- Graphics
- UHD630/GTX 1070
- Mac
- Mobile Phone
That's odd... Doesn't work for me. I get very laggy, unusable graphics with spinning beachball.
BIOS settings?That's odd... Doesn't work for me. I get very laggy, unusable graphics with spinning beachball.
What do you mean by fail condition?
BIOS settings:
Advanced > Chipset Config > Primary Graphics Adapter > Onboard/iGPU
Advanced > Chipset Config > Vt-d > disabled
Advanced > Chipset Config > Restore on AC Power Loss > Enabled [Not required, but very useful an automated media center.]
Advanced > USB Configuration > XHCI Handoff > Enabled
H.W. Monitor > CPU_OPT / W_Pump Switch > Water Pump
H.W. Monitor > CPU Optional Fan Control Mode > PWM
And I think I've also changed IGPU memory to 128mb as suggested somewhere.
You have latest Lilu.kext?If I use the multibeast method, I get almost perfectly working graphics. Only waking from sleep causes weird graphic tearing and glitching. System is basically unusable. But I can restart and shutdown with no problems.
If I use only graphics fixup kext and fake ID, I get really slow, dimmed graphics with the spinning beach ball, system is unusable, but I can still restart and shutdown if I'm patient.
If I use no kext, no fake ID or anything in Clover, I get VESA graphics with tearing and glitches, but at least it somewhat works. No restart/shutdown issues.
59128086 worked for me for FakeID.
But for platform id, I used 0x59120000.
You can experiment based on my posts and see how it turns out.