- Joined
- Feb 27, 2015
- Messages
- 17
- Motherboard
- Mobile Intel QM77 Express
- CPU
- Intel I5 3320M 2.6GHz
- Graphics
- Intel HD 4000
- Mac
Same result when I unplug my graphics card.
Same result when I unplug my graphics card.
same....
By now I unplugged all unnecessary things. No card reader, no wlan, everything is out except the essentials.
Ok some settings in the BIOS weren't correct.
Settings that I could find and changed:
Intel Adaptive Thermal Monitor --> Disabled
Limit CPUID Maximum --> Enabled (the item will allow legacy OS to boot even without support for CPUs with extended CPUID functions)
Intel Virtualization Technology --> Disabled
EIST --> Disabled
SATA --> AHCI (was already correct)
SMART is enabled -- should I disable it?
Legacy USB Support --> Enabled
Intel xHCI --> from Smart AUTO to AUTO
EHCI Hand-off --> Enabled
Fast Boot --> Dusabked
Launch CSM --> Enabled
Boot Device Control --> Legacy OPROM only (or should this be UEFI?)
Secure Boot -- OS Type --> Other OS (was Windows UEFI Mode)
use can use the flag "dart=0" for disabling the VT-DWhat I didn't find:
VT-D
So after changing all that, it reboots after some time. So clearly I changed something I shouldn't have?
So, more precisely:
It loads the Chimera
I choose the OSX installer
After a short flash of the apple logo, it reboots
then again tried some of the 'boot flags', but it still reboots.
So I also cannot really show you a screenshot of any clear error, because it's not giving me one...
As from the image which is attached in post#15, i can understand that you are using some other package/bootable files for installation. As per my understanding, it is against this forum rules. You should have to make a bootable media through Unibeast(Chimera)/CLOVER/Chameleon with a Yosemite installation package which is downloaded from Appstore.