Contribute
Register

Intel HD5500 7MB no kext loaded

Status
Not open for further replies.
I've a pretty similar issue.

specs
ASUS K555LB
Intel i7 4500U
8GB RAM


My current specs in Yosemite 10.10
NVIDIA GeForce 940m disable.
Intel HD Graphics 5500 "enable" but, with 4MB of VRAM.

Screenshots:
View attachment 185236View attachment 185237View attachment 185238

I tryed and tryed but, this are very very laggy.

My IORegistryExplorerLog is attached.
Can you help me please?
Sorry for my bad english, and thanks so much.

You're not injecting ig-platform-id... result: graphics drivers don't start.

Recommend 10.11 over 10.10 due to known problems in the Broadwell kexts in 10.10.

Follow the Clover guide linked from the FAQ.

http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Pay attention the Broadwell info in the FAQ. It is important.
 
Thanks for fasted reply.
So, you recommend to upgrade to El Capitan 10.11?
I'll try. Thanks for your time.
 
Thanks for fasted reply.
So, you recommend to upgrade to El Capitan 10.11?
I'll try. Thanks for your time.

And follow the guide. The reason that your graphics are not working is not because of 10.10, it is because your config.plist is wrong.

But even if you got it working with 10.10, it would be unstable, as the Broadwell drivers in 10.10 are known to be unstable on hacks.

You will need to set DVMT-prealloc as required, so make sure you read up on that...
 
And follow the guide. The reason that your graphics are not working is not because of 10.10, it is because your config.plist is wrong.

But even if you got it working with 10.10, it would be unstable, as the Broadwell drivers in 10.10 are known to be unstable on hacks.

You will need to set DVMT-prealloc as required, so make sure you read up on that...

Sorry for the off-topic.
I finished to download 10.11 El capitan from the app store.
I make an USB booteable with Unibeast.
This doesn't work, just, i put my boot-flags, select the usb stick, hit enter and no change, only black screen.
I tryied verbose mode, and this show only "+++++++++", I select many options in the clover configurator and now i've this screen:

photo_2016-04-16_17-20-36.jpg

Now, i google and found this 2 guides that are yours:
1. http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html
2. http://www.tonymacx86.com/yosemite-...-booting-os-x-installer-laptops-unibeast.html

So, what you recommend to boot the installer?
Thanks again for your time.
 
Sorry for the off-topic.
I finished to download 10.11 El capitan from the app store.
I make an USB booteable with Unibeast.
This doesn't work, just, i put my boot-flags, select the usb stick, hit enter and no change, only black screen.
I tryied verbose mode, and this show only "+++++++++", I select many options in the clover configurator and now i've this screen:

View attachment 185402

Now, i google and found this 2 guides that are yours:
1. http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html
2. http://www.tonymacx86.com/yosemite-...-booting-os-x-installer-laptops-unibeast.html

So, what you recommend to boot the installer?
Thanks again for your time.

The Clover laptop guide is linked from the FAQ (already provided in post #41).
 
The Clover laptop guide is linked from the FAQ (already provided in post #41).

Great.
All OK, installed, and working.

WiFi: OK
Graphics: HD 5500 OK
Audio: I'm searching a solution.

But, all work very fine.
Thanks RehabMan, thanks for all.
 
Working perfectly except darker display: No flickering, no lags.
Laptop ASUS F555LF-DM074T
Graphics: Integrated Intel(R) HD Graphics 5500
Model X555LF

Thanks guys.
 
Last edited:
Rehabman can you extend brightness level on your Intel backlight kext? It's acts only +/- 1 level. It's not dimm to minimum level. Thx. I use both Acpibacklight and Intelbacklight kexts.
 
Last edited:
Status
Not open for further replies.
Back
Top