Intel HD Graphics Framebuffer Edits - Desktop

[Java_Lava]

HD4600+/HD4000/HD3000 Framebuffer Edits

Thanks Toleda


I sorry by bother you, but i have tried almost all for activate the acceleration on the HD4600 and without luck


The theory indicate that my HD4600 is OOB but this for be fake


Following the data that i have recollected from google the device id 8086:0412 is OOB for a system desktop


The unique way that i can enable the acceleration on the HD4600 is activate the option "Inject Intel"
from the clover but when i want attach a monitor way DVI-D or HDMI the video appears with garbage

Check the image




Could be a trouble of frame buffer?, or Can you give me someone clue for fix this trouble?

The configuration of this hackintosh is

CPU: i7 4790
Motherboard: GA-Z97X-UD3H-BK
Graphics card: HD4600 (device id: 8086:0412)
Bios version: F8 (last version)
Bootloader. Clover (last version)
S.O.: 10.10.5 Yosemite

Greetings

 

[Mariappan]

HD4600+/HD4000/HD3000 Framebuffer Edits

Hi Toleda,

I am having a more or less similar set-up and problem as @alovingmummyof3

Setup:
El Caption installed through unibeast method
Dual boot with Linux
Gigabyte GA H97-D3H - 1 VGA, 1 DVI, 1 HDMI ports
Core i5 4690 HD 4600
Monitors:
View sonic 23 inch 1920x1080
LG E2041 20 inch 1600x900

I have connected the DVI port to VS monitor and HDMI port to LG monitor thro' HDMItoDVI convertor.
I tested the following:
VGA to LG & DVI to VS => No login screen after booting
HDMI to LG & DVI to SV => Glitches in both the screen.

Is it possible to get it working?
If not is it possible to disable the VGA port thro' DSDT or something, since connecting VGA port to monitor makes OSX not to display anything even in DVI port.

I am dual booting this setup with linux in which I am using both monitors.
And it is really painful to disconnect and connect VGA cable often, if i switch OS.

Can you suggest some thing that best suits this setup?
Thanks a lot

 

[toleda]

HD4600+/HD4000/HD3000 Framebuffer Edits

Could be a trouble of frame buffer?, or Can you give me someone clue for fix this trouble?

No files attached. See Problem Reporting, Post #1

 

[toleda]

HD4600+/HD4000/HD3000 Framebuffer Edits

Can you suggest some thing that best suits this setup?

VGA is not supported, use DP/HDMi/DVI2VGA adapter.
See Problem Reporting, Post #1.

 

[Mariappan]

HD4600+/HD4000/HD3000 Framebuffer Edits

VGA is not supported, use DP/HDMi/DVI2VGA adapter.
See Problem Reporting, Post #1.

Thanks toleda. Yes I am having DVI connector on both the monitors.
LG E2041 - DVI and VGA
View sonic 23 inch - DVI and HDMI

Problem is when i connect both DVI and HDMI to LG and view sonic. No display is seen. there were glitches
everywhere. Not able to run any tool to get details.

 

[Java_Lava]

HD4600+/HD4000/HD3000 Framebuffer Edits

No files attached. See Problem Reporting, Post #1

Thanks Toleda but the fix to my problem was change the boot display from PCI-e to IGFX

Now ... is the turn of HDMI

Greetings

 

[Mariappan]

HD4600+/HD4000/HD3000 Framebuffer Edits

Toleda


My Dual monitor problem with HD4600 is partially resolved.


I have connected both the monitors to DVI and HDMI. And as usual my first monitor(DVI) has lot of glitches. So i started to switch off my first monitor when i boot into OSX.
Today accidently i switched on the first monitor and found that the monitor works properly without any glitches. After some test trials, found first monitor starts working after sleep/wake.


So now I am sure there seems to be no issue with my setup. Only thing is I need to do sleep/wake immediately after boot-up.


Do u have any suggestion to make it work immediately after boot up?


@alovingmommyof3 You can also try whether after sleep/wake, both monitor works fine.

 

[toleda]

HD4600+/HD4000/HD3000 Framebuffer Edits

Do u have any suggestion to make it work immediately after boot up?

Off topic.

 

[toleda]

HD4600+/HD4000/HD3000 Framebuffer Edits

Update: 10.11/El Capitan, Broadwell and Clover support
See Post #1

 

[st-small]

Intel HD4600+/HD4000/HD3000 Framebuffer Edits

Hi guys!

Have troubles with my desktop hd4600!

I installed Yosemite with FakeId 0x0d220003, but now I can't do something to enable my graphic more than 3 MB.

I read the post #1 and done all, but have nothing.

What I done:

1. In Clover config.plist set fakeId=0x4128086 and ig-platform-id=0x0d22003.
2. Download IoJones and start it.
3. Have GFX0@2, but there aren't any "snb-platform-id" and "AppleIntelFramebuffer".



How can I check my connectors and do something with my graphic?

Thank you very much fro any helpful information!!!